#1
|
|||
|
|||
Can I store an opened string set because I need just the D string?
Hello, I am an idiot who just shaved off the winding on my D string with the allen key while adjusting the truss rod. I did it right after putting on a new set of 10 Guage Ernie Balls basically ruining a brand new string. So, I just ordered another set but will be using just the D String as it would be a total waste replacing all of them.
My question is, will the rest of the strings in the set get corroded? What could I do to preserve them for the future? I am from Central India and the temperature here is around 36°C if that information is of any use. Thanks in advance! |
#2
|
|||
|
|||
No corrosion problem unless you're in a coastal area. In which case wrap the string box/bag in kitchen film to prevent air entering
Last edited by Ray175; 05-06-2021 at 06:57 AM. |
#3
|
|||
|
|||
Just store them so that they remain dry.
__________________
Breedlove, Landola, a couple of electrics, and a guitar-shaped-object |
#4
|
|||
|
|||
I have an incomplete set for like 7 years ago and they still look like new.
|
#5
|
|||
|
|||
yea,, put em a zip lock back and store them in the case compartment.
you now have spares!
__________________
Ray Gibson SJ200 Taylor Grand Symphony Taylor 514CE-NY Taylor 814CE Deluxe V-Class Guild F1512 Alvarez DY74 Snowflake ('78) |
#6
|
|||
|
|||
Quote:
uAdi, Welcome to the AGF! How's the humidity in Central India, specifically in your home? That's what you need to watch out for. If it's humid, store a silica gel pack in the bag. What guitar are you playing? BTW - What you did is not an "idiot" move. I'm sure most of us here have done far worse things than ruining just a single string. |
#7
|
|||
|
|||
Thanks for the answer! No, I am far away from the coast! Still, I'll store them in the suggested packing.
|
#8
|
|||
|
|||
Thanks for the answer! No, I am far away from the coast! Still, I'll store them in the suggested packing.
|
#9
|
|||
|
|||
|
#10
|
|||
|
|||
Thanks for your response! That sounds really assuring!
|
#11
|
|||
|
|||
I will! Thanks for responding! On that note, how often should one change their strings?
|
#12
|
|||
|
|||
Quote:
I am playing a Cort X300 and a Cort AD850. I am a fairly new player. Finally built up the courage to change the strings on a Floyd Rose but ended up messing the bridge and the string. So maybe I have in fact done some worse things to the guitar but the string is just the tip of the iceberg lol because the bridge is no longer parallel due to the gauge shift. My guitar came with 9 gauge but I wanted a bit heavier strings so I went with the 10s. I've tightened the balancing screws almost all the way in but the bridge is still a bit risen up. I haven't even checked the intonation on it which I am pretty sure is messed up as well. Maybe doing a string change for the first time after watching merely a youtube video was an idiot move..... |
#13
|
|||
|
|||
There is no straight answer. Depends on the strings, your guitar, and you.
Some like the sound of very new strings, some like the sound of old strings. I suppose you should change when the sound is no longer as good, or if you see significant wear.
__________________
Breedlove, Landola, a couple of electrics, and a guitar-shaped-object |
#14
|
|||
|
|||
A Floyd Rose can be difficult to setup but watch some good YouTube videos and do some reading and you'll get it. It takes time and it's a balancing act but you will get it. Changing gauge will require a reset with the Floyd Rose. I've setup my Floyd before and it's doable.
Don't give up but if I were you and I had a few bucks I would take it to someone who knows what they're doing. Do you have any friends that know how to setup a Floyd? Regarding strings, wipe your strings with a cotton or microfiber every time you play the guitar. Also, wash your hands before playing. Those two things will extend your string life considerably. Quote:
|
|
Tags |
electric guitar, string breakage, truss rod adjustment |
|