#241
|
|||
|
|||
[size="7"]wow![ wow!/size]
|
#242
|
|||
|
|||
Okay, so although I am Carbonius, I have yet to own a Carbon guitar. I was too afraid to buy one years ago as nobody carried them around here. Well now a local dealer has a nice GXi Copper burst in at an amazing price. I think it was a demo model. At first I didn't like the tone much as I was really used to Taylor's. The tone is a little darker, but not bad. I have had substantial hearing changes through the last 3 years and found the GXi tone more attractive now.
The sustain is very good in the first 9 or so frets, average in the 10-14 range and lacking for the rest of the neck. In fact, very strange overwhelming resonance occurs in the 15+ range (yes I play there). The sustain is MOST noticeable for me in the D to F# range on the A string. EVERY Taylor I have tried lacks sustain in that range and the notes get sucked out like a vacuum. The GXi has the same sustain all over that lower register I find that the high E & B get a bit lost with moderate to heavy strumming. Is that just from the players perspective?? Some have said that these guitars sound quite different from player vs. listener. How do I remedy that?? Play close to a wall in a small room?? Most of my playing will be just for me. I am assuming that the guitar comes with Phos/Bronz. Would 80/20's add a little clarity and sparkle?? |
#243
|
|||
|
|||
After some experimenting, I found 80/20s on my GX made a big difference and it's all I use on it now.
__________________
National Resophonic NRP 12 Fret Loar LH-700-VS Archtop Eastman E8-OM Herrmann Weissenborn Recording King RP-10 Recording King RG-35-SN Lapsteel Maton 425 12-string ESP 400 series telecaster Eastman T485 Deering Americana Banjo My Youtube |
#244
|
||||
|
||||
Quote:
The tonal qualities of the GXi as you describe seems familiar and strings aren't really going to change any characteristics that you may be less than enamoured with. Given the brands/models that have since emerged, today the GXi would not be up there in my top choices. I'd be considering either an Emerald X20, one of the Rainsongs, or maybe a Blackbird, with a lean to the X20. Just thought I'd share my perspective.
__________________
Tom '21 Martin D-18 Standard | '02 Taylor 814c | '18 Taylor 214ceDLX | '18 Taylor 150e-12 | '78 Ibanez Dread (First acoustic) | '08 CA Cargo | '02 Fender Strat American '57 RI My original songs |
#245
|
|||
|
|||
Carbonius;
In the now defunct Carbon Fiber Guitar Forum, there was an incredible amount of discussion regarding strings and CF instruments. The general consensus seemed to be that strings make a bigger difference with CF than with wood. If you like the guitar at you local dealership but think strings might make it sound better to your ear, you might ask the dealer if you can change the strings and give it a run. I'm pretty focused on nylon string Cf guitars and I've found that strings make a big difference. |
#246
|
|||
|
|||
Quote:
|
#247
|
|||
|
|||
Quote:
The X20 is a total work of art, and one of the bargains of the CF world! More like Grand Concert size. I don't think you'll notice the difference between 4.5" and the X20's 4.75" especially with the curves. It's comfy! The 24 fret neck...honestly, I can see some flash guys (and/or people more talented than I) using 24 frets, but for me, the fretboard extends far enough to bother me a bit if I'm strumming or finger-picking further from the bridge, leading me to play a bit closer to the bridge than I prefer. I'd describe the bass as tight, snappy...not boomy or thumpy. The overall tone is very open, but the notes are harder / more immediate (as opposed to blooming)...someone once said piano-like, which might be right. I can't front: if you want warm tone with thumping bass, I'd look into a larger-bodied hybrid Rainsong. But if you're on-board for the total non-traditional experience, there's nothing out there like the X20! |
#248
|
|||
|
|||
I pretty much agree with everything tommyld says about the X20.
But I've been using Ernie Ball Aluminum Bronze medium gauge strings after many years all D'Addario PB everywhere. I LOVE the Aluminum Bronze. Clarity, sustain, projection almost ridiculous bass when I tune down... and they last like coated strings but are priced like uncoated. Tone-wise, they seem to be in between PB and 80/20. Maybe a bit jangly for some folks when new, but they settle in nicely. |
#249
|
|||
|
|||
Quote:
__________________
Don't chase tone. Make tone. |
#250
|
|||
|
|||
I don't know why I'm only seeing this now, months after you wrote it, but did you try out the ABs?
|
#251
|
|||
|
|||
I have not tried the AB strings on my RainSong. They had great bass response on the Breedlove but that was somewhat overshadowed by a very brassy mid range and the treble seemed a bit strident for my tastes. Since Rainsongs are known for their bright tone already I've been reluctant to try the AB strings- but I might. Right now I've got JP Silk and Bronze and Martin Retros waiting for their turns on the Shorty.
__________________
Don't chase tone. Make tone. |
#252
|
|||
|
|||
oooh... I'd be interested to hear how the silk and bronze are when you try them. LOL
I think we've probably wandered pretty from the original topic... |