|
|
#1
12-16-2023, 12:38 PM
|
|||
|
|||
Froggy Bottom H12 dimension check request
To anyone out there who owns a Froggy Bottom H12, can you provide me with the following dimensions?
I need the dimension from the waist of the guitar to the end of the fretboard and the dimension from the waist of the guitar to the inside edge of the nut. The scale length of the H12 is listed as 25". I'm not sure where along the saddle FB sets that dimension. I want to compare it to my current Froggy Bottom Model M to determine where the nut sits relative to each other. The reference image below is from a Reverb post and is not mine. Thanks, Tommy 
|
|
#2
12-16-2023, 02:29 PM
|
|||
|
|||
|
On my H12 I make those measurements:
Waist to end of fingerboard: 2 3/4" Waist to nut: 20 1/4" There's possibility for a slight tolerance there due to a non-exact location of the waist, but hopefully that helps. Cheers Jordan
|
|
#3
12-16-2023, 03:11 PM
|
|||
|
|||
|
On mine, I got:
Nut to waist: 20 7/16" FB end to waist: 2 15/16" Same eyeball caveat as above. David
__________________
I took up the guitar at 62 as penance for a youth well-spent. Last edited by Deliberate1; 12-16-2023 at 04:04 PM.
|
