The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Closed Thread
 
Thread Tools
  #1  
Old 12-29-2016, 01:16 PM
cigarfan's Avatar
cigarfan cigarfan is offline
Music soothes the soul!
 
Join Date: Jan 2012
Location: Within the blast radius of Washington D.C.
Posts: 4,269
Arrow A Kinnaird Deep Body OM for cigarfan

Well, I just couldn't wait to post any longer. I have commissioned a Kinnaird Deep Body OM with Steve & Ryan. I'm probably way out in front of this with a thread since the guitar won't be finished until later in 2017 but I thought I would give you guys a flavor of what we have in mind and share the photos I've received from Steve so far.

Specs so far ...
Deep Body OM with florentine cutaway
Top: Some type of Euro Spruce yet to be selected (requested AAAA)
Back and Sides: Madagascar Rosewood
Fretboard and Headstock Overlay: Ebony
All wood "Tree-of-Life" fretboard inlay and Torch Headstock inlay to match

We have other surprises in mind but let's keep you in a little suspense!

This is the Madagascar set we've picked.





The neck will be of Mahogany with a center laminate of Bloodwood in the middle with thin Wenge stringers either side.



The center lam will match very well with the sapwood on the back.



Gluing up the neck



The fretboard with mockups of the all wood "Tree-of-Life" has been sent off to Larry Robinson to begin work. This is the mockup we sent.



We are going with Steve's slotted peghead with a torch inlay. The peghead will have an ebony veneer to show off the inlay as much as possible.

Sample of Steve's slotted peghead.



This is the mockup of the all-wood Torch inlay.



This is going to be a fun build and I am really looking forward to getting my very own Kinnaird!
__________________
Life is like a box of chocolates ....

Last edited by cigarfan; 02-13-2017 at 04:22 PM.
  #2  
Old 12-29-2016, 01:31 PM
Guitars44me's Avatar
Guitars44me Guitars44me is offline
Charter Member
 
Join Date: Feb 2014
Location: Mountains east of San Diego
Posts: 3,733
Smile Yay!!!

This will be fun to watch! And,even more fun to PLAY!!!

Good on ya, and have a swell New Years!

Cheers
Paul
__________________
2016 Taylor 552ce 12 fret 12 string W/OHSC
2000 Pre-NT Taylor K-14c W/OHSC
Acoustic Image Coda III Amp

FOUR John Kinnaird Customs 😃
R.T 2c 12 fret custom
Only 4 more 90s Taylors
'16 552 12 fret 12 string
64 Martin 0-16 NY
Too many more...
"OLD ENOUGH TO KNOW BETTER, TOO YOUNG TO CARE!"
  #3  
Old 12-29-2016, 02:11 PM
Montesdad Montesdad is offline
Registered User
 
Join Date: Sep 2012
Location: The OC - So Cal
Posts: 1,272
Default

That's going to be one fine looking guitar.

Great wood selection, beautiful inlays and I'm a sucker for a florentine cut.

Look forward to the progress on your new build.

Last edited by Montesdad; 12-30-2016 at 07:19 AM.
  #4  
Old 12-29-2016, 02:35 PM
dcn's Avatar
dcn dcn is offline
Charter Member
 
Join Date: Jun 2013
Posts: 329
Default

So classy, this will be a treat to follow along, cigarfan. Congrats!
__________________
Soundcloud | YouTube
  #5  
Old 12-29-2016, 04:01 PM
TomB'sox's Avatar
TomB'sox TomB'sox is offline
Moderator
 
Join Date: Dec 2014
Location: Upstate Ny via Minnesota, soon heading to Texas
Posts: 7,616
Default

Holy Moly is that going to be a looking. That wood set is amazing, my goodness!!!!!!
__________________
PS. I love guitars!
  #6  
Old 12-29-2016, 04:07 PM
j. Kinnaird's Avatar
j. Kinnaird j. Kinnaird is offline
AGF Sponsor
 
Join Date: Sep 2013
Posts: 1,838
Default

That's going to look great! Love the wood and the inlay. You're going to be impressed with the sound and build quality
__________________
John Kinnaird Guitars
  #7  
Old 12-29-2016, 04:10 PM
Kerbie Kerbie is offline
Moderator
 
Join Date: Jan 2011
Posts: 20,765
Default

Oh my, the wood is stunning! Can't wait to watch... and live vicariously.
  #8  
Old 12-29-2016, 04:54 PM
ukejon ukejon is offline
Charter Member
 
Join Date: Jan 2008
Location: Milwaukee
Posts: 6,549
Default

Zoinks!!!!!!

This will be a visually thrilling build. Fantastic woods.
__________________
My YouTube Page:
http://www.youtube.com/user/ukejon



2014 Pono N30 DC EIR/Spruce crossover
2009 Pono koa parlor (NAMM prototype)
2018 Maton EBG808TEC
2014 Hatcher Greta 13 fret cutaway in EIR/cedar
2017 Hatcher Josie fan fret mahogany
1973 Sigma GCR7 (OM model) rosewood and spruce
2014 Rainsong OM1000N2
....and about 5 really nice tenor ukuleles at any given moment
  #9  
Old 12-29-2016, 06:45 PM
Diamondave's Avatar
Diamondave Diamondave is offline
Charter Member
 
Join Date: Jan 2006
Location: Venice CA
Posts: 2,346
Default

What an extravagant look...!!! Oh yea...
__________________
onedayatatime
  #10  
Old 12-30-2016, 04:58 AM
invguy921's Avatar
invguy921 invguy921 is offline
Lovin' nice guitars...
 
Join Date: Mar 2009
Location: S. Central Missouri
Posts: 2,474
Default

Dennis, oh my goodness!!! What a classy guitar this is going to be. The Madi looks fantastic. The inlays are going to be simply gorgeous. This one makes my mouth water lol.

And...what a great couple of guys to work with. I think Steve and Ryan are some of the finest guys in the business...and they build some friggin' amazing guitars. I'll be watching this one for sure.

Congratulations!
__________________
"A good name is to be chosen rather than great riches, and favor is better than silver or gold."

Woody (aka: Mike)
  #11  
Old 12-30-2016, 05:46 AM
cigarfan's Avatar
cigarfan cigarfan is offline
Music soothes the soul!
 
Join Date: Jan 2012
Location: Within the blast radius of Washington D.C.
Posts: 4,269
Default

Thanks ladies and gentleman for all the comments. Appreciate your following along. I really enjoy the journey.
__________________
Life is like a box of chocolates ....

Last edited by cigarfan; 01-18-2017 at 03:49 AM. Reason: wanted to be gender inclusive
  #12  
Old 12-30-2016, 05:49 AM
Haasome's Avatar
Haasome Haasome is offline
Charter Picker
 
Join Date: Nov 2014
Location: Massachusetts
Posts: 8,649
Default

That looks incredible Dennis. I'll be following this one.
__________________
Paul
  #13  
Old 12-30-2016, 06:53 AM
cigarfan's Avatar
cigarfan cigarfan is offline
Music soothes the soul!
 
Join Date: Jan 2012
Location: Within the blast radius of Washington D.C.
Posts: 4,269
Default

These fellas work hard. This week the shop is usually closed and yet here I am receiving progress photos. When Steve and I spoke about the all wood inlays it forced this build to be accomplished a bit out of the normal order. The fretboard was first since that would take the most time and now the neck/peghead so Larry can work on the torch inlay next.

In this photo Steve has trued up the fretboard surface, as well as peghead area. He has routed for truss rod, and the two slots for carbon fiber bars. The head area was narrowed to accommodate the peghead "ears" which are glued in place here. Steve does this to strengthen the head with long grain.

Both the headplate and backplate of the peghead will be dark veneer, light veneer and jet black Ebony on the exterior. Will make for a very interested look from the sides and in the slots as they are ramped for the strings.

__________________
Life is like a box of chocolates ....
  #14  
Old 12-30-2016, 07:18 AM
mikealpine's Avatar
mikealpine mikealpine is offline
Charter Member
 
Join Date: Jan 2011
Location: Long Island, NY
Posts: 4,951
Default

Dennis, this is going to be stunning!
__________________
---------------------------------------

2013 Joel Stehr Dreadnought - Carpathian/Malaysian BW
2014 RainSong H-OM1000N2
2017 Rainsong BI-WS1000N2
2013 Chris Ensor Concert - Port Orford Cedar/Wenge
1980ish Takamine EF363 complete with irreplaceable memories
A bunch of electrics (too many!!)
  #15  
Old 12-30-2016, 09:31 AM
Daveac Daveac is offline
Charter Member
 
Join Date: Nov 2013
Location: Arlington Texas
Posts: 151
Default

I really like the all wood theme, the inlay design looks amazing. Looking forward to following this one !!
__________________
Steve Kinnaird SJ Ziricote/Port Orford
Steve Kinnaird 00 Madagascar/Sinker Redwood
Rainsong JM1000N2
Closed Thread

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Thread Tools



All times are GMT -6. The time now is 09:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=