Guitars in stock - January 2024

[J.R. Rogers]

Sponsors (luthiers/builders/manufacturers), what guitars do you currently have in stock for sale or available from a dealer?

(Note: Sponsors only, please. I'll unstick this thread every month and start a new one to keep things fresh.)

JR

[Bill Kraus]

www.krausguitars.com
Top: bearclaw Sitka spruce.
Back and sides: quartersawn Honduran rosewood.
Fret board, bridge, headplate: ebony.
Fretboard radius: 12"
Bindings and trim: curly black mesquite.
Neck: Honduran mahogany.
Rosette: three ring, abalone and curly black mesquite.
Tuners: gold Gotoh 510
Bridge pins: ebony with abalone.
Neck width at nut: 1-3/4".
string spacing at the bridge: 2-3/16".
price :$6000.00

[Salz Guitars]

Brand new handmade acoustic guitar made in Praue, Czech republic. This one includes some innovative bulding techniques like falcate braced top (credit to Trevor Gore) structured sides (credit to Jeremy Clark of 52 instrument co.), active back plate and bolt on - bolt off neck (which allows the instrument to be completely diassembled within 2 minutes)

This is one of two first PS models. Sizewise close to the 00 (a little biger than a classical guitar). Due to its size it’s very comfortable to play.

Shipping worldwide available after contacting me. (I need to calculate the price depending on the country shipping to)

MATERIALS:

Soundboard - Swiss moon spruce

Back and sides - East indian rosewood, sides are structured - outer layer is East indian rosewood, core is kerfed Basswood and inner veneer is 0.6mm reclaimed Bog Oak from Charles bridge (one of the oldest bridges in Prague, Czech Republic)

Neck - one piece mahagony (headstock scarf jointed)

Fretboard, bridge, bridge pins, binding, headstock and back overlay - Crelicam ebony

Rosette - Crescent moon style, made of recycled math book paper, coffee grounds and bound with brass.

Finish - Natural oil over epoxy base

Frets - EVO gold

Tuners - Schaller M6 with ebony buttons

Nut and saddle - Bone

Case - SKB

SIZES:

Scale - 650mm (25.59")

Frets to body - 12

Lower bout width - 365mm (14.37")

Width at nut - 45mm (1.77")

Spacing at saddle - 59mm (2.32")

Fingerboard radius - 14”

PRICE: 4600 EUR plus shipping

[Salz Guitars]

Brand new handmade acoustic guitar made in Praue, Czech republic. This one includes some innovative bulding techniques like falcate braced top (credit to Trevor Gore) structured sides (credit to Jeremy Clark of 52 instrument co.), active back plate and bolt on - bolt off neck (which allows the instrument to be completely diassembled within 2 minutes)

The model PS is sizewise close to the 00 (a little biger than a classical guitar). Due to its size it’s very comfortable to play.

Shipping worldwide available after contacting me. (I need to calculate the price depending on the country shipping to)

MATERIALS:

Soundboard - Sitka spruce

Back and sides - European walnut, sides are structured - outer layer is European walnut, core is kerfed Basswood and inner veneer is 0.6mm reclaimed Bog Oak from Charles bridge (one of the oldest bridges in Prague, Czech Republic)

Neck - Spanish cedar that has been ebonized and stained

Fretboard, bridge, bridge pins, binding, headstock and back overlay - Crelicam ebony

Rosette - Crescent moon style, made of recycled math book paper, coffee grounds and bound with brass.

Finish - Natural oil over epoxy base

Frets - EVO gold

Tuners - Schaller M6 with ebony buttons

Nut and saddle - Bone

Case - SKB

SIZES:

Scale - 650mm (25.59")

Frets to body - 12

Lower bout width - 365mm (14.37")

Width at nut - 45mm (1.77")

Spacing at saddle - 59mm (2.32")

Fingerboard radius - 14”

PRICE: 5500 EUR plus shipping

[mike o]

Wow Salz. Those are stunning!

[IndianHillMike]

I think this Tree OO that's just now available at Cedar Rock Studios has to be one of, if not my all-time, favorite guitar I've made in both aesthetics and sound. It's a beauty of a guitar and Cedar Rock Studios and Matt Thomas did a great job with the pics and demo video!

[SkaMar]

Hello

Raise your guitar with our oak stand, handmade in Poland. Gold resin accents add a touch of sophistication. Safe, stylish and proudly made in Poland.

We have 5 pcs of these custom made guitar stands - 3 x oak, 2 x walnut.

Price is 500USD (delivery usually is 100USD)

















More at https://happyguitar.eu/product-category/guitar-stands/