|
|
#1
08-24-2010, 12:35 AM
|
|||
|
|||
GXt + Jamman + Aura DI - how would you hook em' up?
Hi folks,
I just recently finalised my live 'set up'. It will consist of the following: - Gibson SWD / Furch OM (both have Fishman pups) - Marshall AS 50D amp - Jamman Stereo - Harmony Gxt - Fishman Aura DI Spectrum - Shure SM58 What i wanted to ask is in which ORDER would you hook up the Jamman, Gxt and the Aura ? Meaning, to which device should i first plug my guitar into (Aura i imagine) then use a patch cable to 2nd device and then finishing with the final device that will go to the Marshall. Hope that makes sense.. Can you give me your advice how would you set this up, in wich order ? thanks a lot, Mark
__________________
The Big Fat Lady 02' Gibson J-150 The Squares 11' Hummingbird TV, 08' Dove The Slopeys 11' Gibson SJ (Aaron Lewis) The Pickers 43' Gibson LG-2, 09' Furch OM 32SM (custom) , 02' Martin J-40 The Beater 99' Cort Earth 100 What we do on weekends: http://www.reverbnation.com/doubleshotprague 
|
|
#2
08-24-2010, 06:01 AM
|
|||
|
|||
|
I think I would go to the GXT first so the guitar signal arrives uncolored which may mess up the chord recognition for harmonies. Second would be the aura then the Jam Man.
__________________
“With every mistake we must surely be learning”
|
|
#3
08-25-2010, 07:21 AM
|
|||
|
|||
|
Anyone else had a POV how to best hook up these three items ... Buller, Buller .. ?
__________________
The Big Fat Lady 02' Gibson J-150 The Squares 11' Hummingbird TV, 08' Dove The Slopeys 11' Gibson SJ (Aaron Lewis) The Pickers 43' Gibson LG-2, 09' Furch OM 32SM (custom) , 02' Martin J-40 The Beater 99' Cort Earth 100 What we do on weekends: http://www.reverbnation.com/doubleshotprague
|
|
#4
08-25-2010, 12:01 PM
|
|||
|
|||
|
Orphan has got it right in my opinion. I have a VL4 which is the first input, everything else in the middle (not much) and Jamman is always last.
|
|
#5
08-27-2010, 06:21 AM
|
|||
|
|||
|
I use the auras two outputs - The XLR out goes straight to the PA because I don't want my guitar sound to go through the Harmony pedal..just to keep my guitar sound unaffected. The 1/4" output of the aura goes to the harmony pedal and I use a "dummy" plug in the pass through jack. Or if I need to connect to anything else I remove the dummy plug and continue the signal chain.
|
