The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Acoustic Amplification

Reply
 
Thread Tools
  #1  
Old 05-31-2017, 07:55 AM
guitaniac guitaniac is offline
Registered User
 
Join Date: Jan 2004
Posts: 6,709
Default Feedback Killer Question for iRig Acoustic Stage Users

I recall hearing or reading somewhere that the Feedback Canceler in the little iRig Acoustic Stage preamp is applied to the entire blended signal when the user employs the preamp's Aux In to blend some pickup signal in with the mic signal. Can iRig Acoustic Stage Users confirm that this is true?

Will the preamp's feedback canceler work with the pickup signal alone if the blender is set for full pickup and there's no mic signal in the blend?

Thanks in advance for any answers to these questions.
Reply With Quote
  #2  
Old 06-01-2017, 08:24 AM
ikmultimedia ikmultimedia is offline
Registered User
 
Join Date: Oct 2015
Posts: 6
Default

Hi, our developers have confirmed that Tone, Feedback Killer, Volume and Phase Switch are all on both AUX and the MEMS microphone on iRig Acoustic Stage. Hope that helps! Thank you.
Reply With Quote
  #3  
Old 06-01-2017, 10:32 AM
guitaniac guitaniac is offline
Registered User
 
Join Date: Jan 2004
Posts: 6,709
Default

Quote:
Originally Posted by ikmultimedia View Post
Hi, our developers have confirmed that Tone, Feedback Killer, Volume and Phase Switch are all on both AUX and the MEMS microphone on iRig Acoustic Stage. Hope that helps! Thank you.
That's great news! Thanks for answering.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Acoustic Amplification

Thread Tools





All times are GMT -6. The time now is 05:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=