#1
|
|||
|
|||
Custom truss rod cover
Hi guys.
I'm having some set up done on a Taylor 314CE-N and I'm considering adding a custom truss rod cover while everything is undone. Where is the best place to look? I'd like something to match the Sitka top I think Here's a pic of the current so you'll know what I need So long, and thanks for all the fish. |
#2
|
|||
|
|||
They probably don't have Sitka but you can check out the Petros website, as they do sell truss rod covers in different styles and woods.
|
#3
|
|||
|
|||
Some more fish. . .
__________________
Cheers, Frank Ford |
#4
|
|||
|
|||
Love it frank
So long, and thanks for all the fish. |
#5
|
|||
|
|||
So id also like to get wooden tuner buttons, but the Taylor site only says "nylon nickel with pearloid" buttons....
Any ideas? So long, and thanks for all the fish. |
#6
|
|||
|
|||
? Check the Petros site, they sell tuner buttons, as well as other stuff...
|
#7
|
|||
|
|||
Quote:
I did They didn't have any of the straight covers like the shape is on the Taylor. They only had the ones with a flair at the bottom, and I'm not sure it would fit right.. I'm afraid it would push over into the slot So long, and thanks for all the fish. |
#8
|
|||
|
|||
Why not make your own? It's the easiest part on a guitar to make, you already have the template, you will get exactly what you want. Cheap coping saw and some fine sanding, smal bit in a hand drill. You will practically be a luthier when done.
__________________
BradHall _____________________ |
#9
|
||||
|
||||
Talk to Bill Nichols - he recently made one for me and I worked with him on the unique size of this one (thinner than others).
__________________
Fazool "The wand chooses the wizard, Mr. Potter" Taylor GC7, GA3-12, SB2-C, SB2-Cp...... Ibanez AVC-11MHx , AC-240 |
#10
|
|||
|
|||
You can also check with folks who make/supply mandolin and banjo parts. Custom truss rod covers are pretty common with those instruments.
|