#1
|
|||
|
|||
Bitterroot Guitars truss rod
Is anybody familiar with and have opinions on the truss rods from Bitterroot Guitars?
https://www.bitterrootguitars.com/Ho...ods-s/1914.htm |
#2
|
|||
|
|||
opinions
I bought two and gave them away. I subsequently took a conservative path and bought truss rods from Martin. These are parts I don't want to see ever again once they're installed. They might be just fine, but I didn't want to take risks that can be avoided for a few bucks' investment.
|
#3
|
|||
|
|||
Quote:
__________________
Tim B |
#4
|
|||
|
|||
good news
Nice to see experience mentioned. I'll hold that thought. Thanks!
|
#5
|
|||
|
|||
I used two of them and have 2 or three more. A welding buddy of mine said the welds looked just fine on them. I don't have an issue with them. I will probably stick with Martin but I bought those just to see, and they seem fine to me.
|
#6
|
|||
|
|||
I know nothing about their truss rods, but I bought several sets of tuning machines from bitterrootguitars.com and they were just fine. The one's I bought aren't quite as smooth as Gotohs, but they tune easily, stay in tune, and look good. And they cost $18 a set.
|