The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Archtops

Thread Tools
Old 02-09-2020, 10:42 PM
msaxen msaxen is offline
Registered User
Join Date: Feb 2020
Posts: 1
Default Fingerstyle on Electric Archtop issues

As a fingerstyle guitarist I am finding it difficult to play with index, middle and ring fingers when playing through a pickup. the E and B strings sound harsh if I play a rest stroke using i,m or a with any kind of force when the volume and gain are turned up. My nails are pretty short (about 1mm) so I get a combination of flesh and nail on the stroke, but it almost seems like the pickup is too sensitive if the gain is anywhere around 40% or higher. This makes it hard to use fingers to play solo lines when playing in a group with a bass and drums. I am playing an Eastman AR805CEL (with a floating pickup) through a Fishman Loudbox Performer. I tried running it through a Roland JC40, which helps with volume, but it seems to sound more like an electric through that amp.

Anyone else had this kind of issue?
Reply With Quote
Old 02-10-2020, 02:49 AM
Michael Watts's Avatar
Michael Watts Michael Watts is offline
Charter Member
Join Date: Mar 2008
Location: London UK
Posts: 2,949

This is something I've been working on myself as I've recently been exploring archtop textures in the studio. There is no escaping it, some adjustment in playing approach is necessary when going from flat-top to archtop, you get used to it though!

Here are some of my initial thoughts

Album Recording Diary
Skype Lessons
Luthier Stories

Guitars by Jason Kostal, Strings by Elixir, Gefell Mics and a nail buffer.
Reply With Quote
Old 02-10-2020, 06:46 AM
MC5C MC5C is offline
Registered User
Join Date: Mar 2016
Location: Tatamagouche Nova Scotia
Posts: 1,061

As a mechanical adjustment, many humbuckers and other pickups have adjustable pole pieces, perhaps adjusting yours can make a difference. Also, many fingerstyle electric guitars (me, for example, sometimes) don't use rest strokes, and don't play with right hand power the way you do with a nylon string guitar. It is a different technique. Let the electronics do some of the work...

Funny story, maybe - I was at a concert with a few of my friends playing. Two were classically trained classical guitarists, with excellent technique for that style of playing. They played un-mic'd, and filled the room with sound easily. My other friend, who is kind of a self-taught fingerstyle jazz guitarist, who played electric archtops for many years but now composes and plays classical, had her classical guitar mic'd and still was quieter than the other two players. Great player, different style with the right hand.
Brian Evans
1935 Dobro model 25 resonator
1943 Paramount (made by Kay) mandolin
1946 Epiphone Zephyr electric archtop
1957 Hofner Senator archtop
1962 Gibson Melody Maker electric
1963 National Dynamic lap steel
1996 Landola jumbo
1998 Godin Artisan TC electric
1998 Epiphone SG electric
2010 GoldTone PBR-CA resonator
2015 Evans electric archtop
2016 Evans archtop
Reply With Quote
Old 02-10-2020, 08:49 AM
mr. beaumont mr. beaumont is offline
Registered User
Join Date: Jul 2010
Location: Chicago, IL
Posts: 8,531

You're kind of fighting what that guitar is made for. If you want it to sound like an acoustic, the magnetic pickup is going to get in your way. Generally, I've found any electric guitar (and that's what that is, as soon as you plug it in) through an acoustic amp always sounds harsh and brittle.

Stick with the electric amp and don't try to get an "acoustic" sound, just focus on a "good" sound. Me personally, I've never liked using nails on an electric guitar.
Jeff Matz, Jazz Guitar:
Reply With Quote
Old 02-10-2020, 11:21 AM
JGinNJ JGinNJ is offline
Registered User
Join Date: Dec 2016
Posts: 257

Fingerstyle is fine for solo & quiet playing, but I've found with jam sessions and big band, I had to use a pick to be able to cut through. Using fingers to do that will get twangy and harsh. The few Eastman's I've played sounded kind of bright.
If you're going to use fingers, gain is your friend. Some archtop guitars sound good with acoustic amplification, my Martin CF-1 sounds nice with the Roland Cube acoustic setting. But generally, I prefer my Jazz Chorus or a Fender blackface tone.
Reply With Quote
Old 02-11-2020, 07:29 PM
Aspiring Aspiring is offline
Charter Member
Join Date: Jan 2019
Location: Seattle, WA
Posts: 607

I play fingerstyle with nails on my electric thin semi and hollowbody. I also use rest strokes on some notes.

On both of them I played quite a bit with pickup and pole height.

The 2nd and 3rd strings were typically the problems.

Now you have me wondering if my setup would be terrible with a pick. Need to try that.
Reply With Quote
Old 02-11-2020, 11:30 PM
Al Acuff's Avatar
Al Acuff Al Acuff is offline
Charter Member
Join Date: May 2017
Location: Santa Fe, New Mexico
Posts: 607

Chet Atkins did OK at playing archtop guitars fingerstyle. So did Merle Travis.

Al Acuff
Al's Folk Music Blog
Alan Acuff Music
Reply With Quote
Old 02-13-2020, 07:02 AM
guitararmy guitararmy is offline
Registered User
Join Date: Jul 2006
Location: The Mountain State
Posts: 3,788

I know Tuck Andress has written a bit about his guitar setup for fingerstyle jazz, using a Gibson L5 and a Bartolini pickup. I don't recall if he addressed string volume issues, but that pickup is sealed without pole adjustments.
Reply With Quote
Old 02-27-2020, 02:54 PM
SprintBob's Avatar
SprintBob SprintBob is offline
Charter Member
Join Date: Sep 2013
Posts: 4,644

Martin Taylor is another incredible archtop fingerstylist, check him out. Agree with Jeff above about matching the amp to the guitar.
Doerr Trinity 00 (Lutz/Maple)
Edwinson Zephyr 13 Fret 00 (Adi/Coco)
Emerald X-20 (all carbon fiber)
Eastman 810CE (Spruce/Maple archtop)
Froggy Bottom H-12 (Adi/EIR)
Rainsong APSE (all carbon fiber)
Reply With Quote
Old 02-28-2020, 02:40 PM
Glennwillow Glennwillow is online now
Charter Member
Join Date: Mar 2008
Location: Coastal Washington State
Posts: 36,723

The sound I like best from my Eastman archtop using the factory installed Kent Armstrong pickup is through a simulation of a tube preamp in my POD XT Pro rack mount unit. It's mellowed out a little bit and yet it still has a very "Hi-Fi" sound to it, much like the sound Martin Taylor gets. I also play with short nails and bare thumb so that there is not a lot of irritating treble in my sound.

Tuck Andress gets a wonderful sound from his L5 and his Bartolini pickup going into a preamp. He does not use a guitar amp.

From Vintage Guitar Magazine:
"Whatís in you recording rig?

After the volume pedal, the guitar goes into an Aphex 124A interface, which converts the -10db signal to +4db. That goes into a GML 20-bit A/D converter, then the signal is recorded. We record with a Sonic Solutions hard disk editor. I donít use any guitar amps. We just try to accurately record what comes off the guitar and what comes off Pattiís mic, then in mixdown work with reverb and EQ.

In mixdown, we use Avalon EQs for the guitar. Thatís a big part of the sound of the recorded guitar Ė Avalon can do extreme EQing and sound great. Sonic Solutions is a comparable hard disk editor. Itís used more in mastering and Iíve never heard a digital editor sound better."

- Glenn
My You Tube Channel
Reply With Quote

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Archtops

amplification, electric archtop, fingerstyle, ima

Thread Tools

All times are GMT -6. The time now is 04:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright ©2000 - 2021, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=