For Sale: Collings DS2H 12 fret Dread (Sold Pending approval)

[Black Squirrel]

Time to move this one down the road its one of those guitars, I list it I play it and unlist it. But I have acquired a few Holy grail (to me) instruments. So its time to pass this one down the line.

2001 (18 years old) Bill Collings signed label. It has been played but well cared for. Plays perfect Sounds Amazing its a Great cannon of guitar EIR and 12 frets are such a pleasant sound. It does have a case bite on the top not top deep or through the finish. It shows very light touch from years of playing. Not width is a Measured 1.83 inches right below the nut.

Ships in the original case that has a bit of wear on it as it's done a great job of protecting the instrument.

$2550.00 Net to me after shipping and fees.
I'm not looking at trades,

Specs after pics.










aforementioned case bite


















Specs:

op Sitka spruce
Back & Sides E. Indian rosewood
Neck Honduran mahogany
Body Binding Ivoroid with herringbone purfling
Fingerboard Binding None
Peghead Binding None
Bridge Ebony belly-style with 2 3/8" spacing
Fingerboard Ebony with abalone long diamond & squares
Bridge Pins/End Pin Ebony with MOP dot
Nut Bone, 1 13/16"
Saddle Bone, drop-in
Neck Profile Modified V
Peghead Profile Tapered slotted square with volute
Neck Joint Mortise & tenon hybrid
Truss Rod Fully adjustable
Frets Medium 18% nickel-silver
Peghead Veneer Stained Exotic Ebony with MOP Collings logo
Tuners Nickel Waverly (16:1 ratio)
Backstrip 2-style (Zipper)
Rosette iv/tort/iv & b/w purflings
Scale Length 25 1/2"
Brace Material Sitka spruce
Brace Pattern Pre-war scalloped X-brace
Fingerboard Radius 14" - 26" compound
Body Finish High gloss nitrocellulose lacquer
Neck Finish High gloss polyester resin
Pickguard Tortoise
Strings D'Addario EJ-17 (.013"- .056")
Case Deluxe hardshell case by TKL
Neck Profile
Neck Profile Diagram
*Actual measurements may vary slightly due to hand-sanding and finishing variables.

Dimensions
Body Length 20 7/8"
Body Depth 4 7/8"
Lower Bout Width 15 5/8"
Total Length 40 1/8"