#1
|
||||
|
||||
Gibson L-00 Custom Shop 2019 Ebony w/ pickup - SOLD
FS: Gibson L-00 Custom Shop 2019 Ebony with Pickup. Additional pics in the Reverb link below. SOLD shipped and paypalled for AGF members, continental US only.
https://reverb.com/item/32266815-gib...ny-with-pickup Gibson L-00 Custom Shop "Made to Measure" order by Music Zoo (original link below). I bought this brand new about a month ago but need to sell it to fund some other gear. One thing to note it, the nut has been replaced with a Graptech nut that is raised a little bit. I intended to use this for slide. Also the nut slots from the factory were cut extremely low. I no longer have the original nut from the factory. I'm selling as "very good" condition as opposed to mint because of this, with the understanding that you will need to take it to a luthier to adjust the action at the nut or get a new one installed. Upon closer inspection, I found minor scratches in the finish which is typical of a nitro finish. Also a small rice mark in the fretboard (pictured in my reverb link above). Shipping is to continental US only. Full specs are below. Original MusicZoo link: https://reverb.com/item/29597536-gib...show_sold=true Gibson L-00 Acoustic-Electric Made 2 Measure Ebony This is an awesome Music Zoo-spec'd Made 2 Measure L-00 acoustic guitar, built with an Ebony finish. The guitar features a complementing white pickguard and the classic "Banner" headstock logo. For times when you need amplification, the onboard L.R. Baggs electronics are there for you! This is a great playing small bodied Gibson acoustic. Includes: Hardshell Case and Paperwork • Acoustic-Electric Guitar • Ebony Finish • Sitka Spruce Top with Traditional Hand-Scalloped X-Bracing • Mahogany Back and Sides • Mahogany Neck • Rosewood Fretboard • Multi-Ply Top and Back Binding • 24-3/4" Scale Length • 20 Frets • L.R. Baggs Electronics • White Button Tuners • 3 lbs, 13 oz. • .840" Neck Thickness at 1st Fret • .910" Neck Thickness at 9th Fret Last edited by jherr; 03-04-2020 at 02:04 PM. |
#2
|
||||
|
||||
Did I miss nut width and finger spacing? Cool looking little guitar.
__________________
Santa Cruz D12-12 string, Ger. Maple/Ger. Spruce Froggy Bottom SJ12 Custom Spalted Maple/ Adirondack Goodall Standard Custom Amazon RW/Italian Spruce Emerald X-20 Custom SS Life's been good to me so far.... |
#3
|
||||
|
||||
Sorry for the oversight. 1.725” nut width, 2 3/16” spacing at the saddle.
|
#4
|
||||
|
||||
Tuesday bump.
|
#5
|
||||
|
||||
Wednesday bump, all PM's responded to.
|
#6
|
||||
|
||||
Sunday bump.
|
#7
|
|||
|
|||
Hi,
What does the “made to measure” refer to? Thanks |
#8
|
||||
|
||||
My understanding is that Music Zoo just spec'd out the guitar they wanted from the custom shop at Gibson and they made it to their specified measurements.
|
#9
|
||||
|
||||
Sunday bump, now $1500 shipped and paypalled.
|
#10
|
||||
|
||||
Tuesday bump, still available.
|
#11
|
||||
|
||||
Guitar is sold
Last edited by jherr; 03-04-2020 at 02:04 PM. |