The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 01-15-2021, 07:36 AM
ClaptonWannabe2 ClaptonWannabe2 is offline
Guest
 
Join Date: Mar 2018
Location: Katy, TX
Posts: 449
Default Novice builders and weather?

What do you guys do? And what do you more experienced guys do? I am at a point where the steps I need to perform are messy. Mainly routing binding channels. This is Texas and this time of year we have some of the most wild swings in temp and humidity. Itís 35 degrees this morning and will be a perfect 65 later today. Humidity will be very low for here though.

I had an issue last year with the last cool front catching me while gluing my back plates. Warm mild but muggy Texas morning. I glued and clamped and weighted the plates. It began to rain and by the time the rain stopped it was cool and crisp. I had a lovely Indian Rosewood potato chip the next day.

Now that my sound box is closed and the neck glued up Iím just waiting. What do you guys do? Or do you do nothing, realize this is a hobby and a slow one, and just wait it out.

I am a garage builder. I have a window unit to handle heat, but no heater to handle cold. A heater dries things out anyway.
Reply With Quote
  #2  
Old 01-15-2021, 09:28 AM
runamuck runamuck is offline
Registered User
 
Join Date: Jul 2006
Posts: 1,704
Default

You don't need to be concerned about temperature and humidity routing binding channels. Just don't glue any bracing on the top or back, or glue the top or back to the sides unless the RH has been in the mid 40s for a couple days in your shop.

People building guitars regularly most often keep their shops at a regulated RH by using a humidifier/dehumidifier
Reply With Quote
  #3  
Old 01-15-2021, 09:30 AM
DickHutchings DickHutchings is offline
Registered User
 
Join Date: Sep 2011
Posts: 19
Default

My suggestion is to start another build or 2 and work on stuff that isn't affected by the weather. Only brace or close the box on the perfect days.
Reply With Quote
  #4  
Old 01-15-2021, 09:38 AM
Skarsaune Skarsaune is offline
Registered User
 
Join Date: Jan 2013
Posts: 834
Default

Close the garage door - you wonít be as affected by weather swings.

I build in my basement and have a dehumidifier. The basement is too damp in the summer even with the dehumidifier, so my building is pretty seasonal. Which works with my life - the farm is a lot less busy in the winter. I do have a room upstairs I do some work in. I monitor the humidity in both locations.

As redir said, itís the cross-grain gluing that is most critical to do under controlled/low humidity conditions. Across grain expansion is way more than longitudinal expansion. So thatís bracing tops & backs and closing the box (gluing tops & bottoms on) for me.

Cutting binding channels, you should be fine.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Thread Tools





All times are GMT -6. The time now is 03:59 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright ©2000 - 2021, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=