#1
|
|||
|
|||
Connecting 2 JBL EON One
Good afternoon All,
I have a pair of JBL EON ONE's and was wondering how to connect the two together. I am wanting to connect the two via the internal mixer on the units. The monitor out is RCA and my understanding is that is unbalanced so cord length could be a concern. I would like to separate the units by about 12-15 ft and in doing that, would I use RCA out to the 1/4 line on channel 3/4? Or, if there are better ways to connect the two I would appreciate any ideas. Thanks for your advice |
#2
|
|||
|
|||
I just bought one of these last Saturday and just happened to come across a video this afternoon that explained how to do it.
Use the "Monitor Out" RCA connections on "unit A" and connect to the RCA inputs of channels 3/4 on "unit B".
__________________
Martin Road Series D10e Martin Special X Custom 000 Martin Special X Custom GPC Epiphone IBG J45 Yamaha FS800 Guild Pilot Bass Guild Flamed Maple Jumbo Junior Guild Flamed Maple Jumbo Junior Bass Recording King Dirty 30's Mando Frankensquier P Bass Squier Bullet Telecaster |
#3
|
|||
|
|||
Thanks so much lapetrarca. I hope you are enjoying yours as much as I'm enjoying mine..
|