|
|
#1
03-08-2020, 07:53 PM
|
||||
|
||||
Yankee HS-M12 Pedalboard Power Supply
5/30/2020 edit: back up for sale
For sale is a Yankee HS-M12 power supply for an effects pedal board in excellent condition (hook-side Velcro on the bottom). This is a professional guitar or bass effects power supply with the ability to power just about every effect available on the market. It is electronically advanced power supply with 8 fully isolated sections. It introduces world’s first stepless voltage regulation feature (1V – 24V DC) with the screen showing set voltage value so you can dial in the voltage you need. Acquiring a C4 Synth changed up my pedalboard and I no longer use the power hungry pedals that require this level of power supply.  Features: ▪ 8 high current outputs in eight fully isolated sections ▪ 4 outputs with groundbreaking, stepless voltage regulation feature (1V – 24V DC), adjustable by multi-turn screw. The screen on the top is showing voltage value set on each output. ▪ 2 AC outputs (9V, 12V or 16V) with 1300 mA or 2000 mA max current that can also be used as 9V or 12V DC ▪ USB output that can charge mobile device or power LED lam to put some light on your pedalboard ▪ All outputs fully isolated and compatible with pedals running on 9V DC ▪ Movable power socket (top or side) ▪ Assembled in durable aluminum housing, using highest quality material providing safety and durability ▪ Powerful, highest quality Toroidal Transformer that will not cause any unwanted noise, even when put directly next to effects ▪ Efficient voltage filters and stabilizers for perfect sound during whole performance ▪ Overheat and short circuit protection will always keep your effects safe ▪ Fits under Pedal Train and can be easily attached to any pedalboard with screws ▪ Dimensions: 50mm x 213mm x 84mm All DC outputs are 5.5 x 2.1mm barrel connectors, center negative. All AC outputs are 5.5 x 2.5mm barrel connectors. In each section only one output with one voltage setup can be used at a time. Just a head's up: this supply runs hot if you use it for an extended period, but it's designed to (apparently how it dissipates the excess energy) according to the manufacturer. Also, please note that two of the LEDs are burned out. This doesn't affect the functionality of the unit (all power channels work), but it does mean that you'll need to use a multimeter when to dial in the exact voltage for those channels. Or, if you prefer, you could replace the LEDs (I've contacted Yankee about this, but they have been slow to respond--probably due to the pandemic.) Includes an IEC power cable, eight standard cables (2.1mm) and two reversed polarity cables (2.5mm). $320 Now $285 shipped CONUS.  
Last edited by Erithon; 06-06-2020 at 09:53 AM. 
|
