#1
|
|||
|
|||
Help me decide
Hello, I am new to this forum and this is my first post. So I am looking for a D-18 style guitar that's more affordable. The only real criteria is that it has to be all solid wood. I have it sort of narrowed down:
-Blueridge BR-140 or BR-160 -Eastman E1D, E2D or AC-320 -Recording King RD-310, RD-318 or RD-127 -Fender PM-1 All of these are $500-$650 new/used on Reverb, which is about my budget. I'm going to try to go to a high end music shop near me tomorrow, to play a few. Any suggestions are welcome. |
#2
|
|||
|
|||
If you get an opportunity to check out an Alvarez Masterworks, add that one on your list. I wasn’t looking when I stumbled upon them/it, nor do I play bluegrass, but the MD60BG model I have does a credible D18 impersonation.
__________________
Love one woman and many guitars...costs way less. |
#3
|
|||
|
|||
I haven't played all the guitars your list, but I've found the BR-140 to sound a lot like a D-18. The BR-160 differs in that it has rosewood back and sides.
You might keep your eyes open for a BR-140A, since it and the BR-140 differ in nut width and aesthetics. The BR-140A also has a Adirondack top, but I don't think that makes much of a difference between the two. IMO, Eastmans have a more modern tone than Martins, but your ears may say different. Have fun checking them out. |
#4
|
|||
|
|||
Are you familiar with the Farida guitars being imported by Elderly Instruments in Michigan? If you search the AGF you will find many complimentary threads about them.
This one would seem to fit your bill, and only a touch more than your budget. https://www.elderly.com/collections/...tic-guitar-171 But note the one review, the poster felt it lacked bottom end, but praised its fit and finish. I have one of their smaller models, and I love it (btw mine is not all solid).
__________________
Bob https://on.soundcloud.com/ZaWP https://youtube.com/channel/UCqodryotxsHRaT5OfYy8Bdg |
#5
|
|||
|
|||
Blueridge would be the way to go of the guitars on your list, the BR-140 and BR-140A are both very nice guitars and would definitely give you the closest to a D-18 sound. Also agree with another poster that Alvarez might be worth checking out.
|
#6
|
||||
|
||||
Quote:
Last edited by RP; 01-17-2020 at 10:47 AM. |
#7
|
|||
|
|||
Quote:
Yeah, I've heard nothing but good things about Blueridges. The narrow necks on them are the only thing making me consider something else. I'm a big guy with big hands so I already have issues with regular sized guitar necks being to small. |
#8
|
|||
|
|||
Quote:
I am also a fan of Blueridges, but the ones I have played do have narrower necks.
__________________
Bob https://on.soundcloud.com/ZaWP https://youtube.com/channel/UCqodryotxsHRaT5OfYy8Bdg |
#9
|
|||
|
|||
I have the Eastman E2D and also the Alvarez MD60BG that others mentioned, and they both are incredible guitars with tons of volume. I also have recently played a D18 and the Alvarez is really close to it and some would even say it sounds as good. Below is a good link to a review of the Alvarez and a Martin.
https://www.youtube.com/watch?v=3tY0...=emb_rel_pause You can't go wrong with the Eastman E2D either. I have only had it for a few weeks and every time I strum it I am amazed by it's beautiful tone. Last edited by Ncbandit; 01-17-2020 at 12:09 PM. |
#10
|
||||
|
||||
First off, Welcome!
there are many good options the Eastman E6D would have the same woods as a D18 this model is my favorite Eastman, and I've had many |
#11
|
|||
|
|||
Quote:
I just saw a video about a recording studio selecting a Steinway piano model D. They went to the Steinway factory to select one of 5 pianos, that I assume cost in the area of $100k (each). They found all to be different, though made by the same hands, with the same wood, frame, etc. If the world's most renowned piano maker cannot produce instruments that sound the same from unit to unit, you can imagine it is impossible to know what you will get from brand/model alone with a $500 guitar. So, my advice would be use the models you listed as starting points, but there is no substitute for demoing your own specific guitar. The chances of buyer's remorse will go down significantly if you forget brand/model and just go buy a guitar that you yourself can choose and love. JMO
__________________
Assuming is not knowing. Knowing is NOT the same as understanding. There is a difference between compassion and wisdom, however compassion cannot supplant wisdom, and wisdom can not occur without understanding. facts don't care about your feelings and FEELINGS ALONE MAKE FOR TERRIBLE, often irreversible DECISIONS |
#12
|
|||
|
|||
If you are lucky enough to find an e2d to try on see if they have the Cedar ac122. I cant find any e2d, e2om or cedar ac122s on the east coast..
|
#13
|
|||
|
|||
My suggestion would be that you play them all. Factory production guitars (by whatever maker) follow kind of a "bell curve" of quality - a few dogs, many mediocre, and a few really good ones. The really good ones cost the same as the "dogs" and the "run of the mill" so you may as well play them all and have the pick of the litter.
|
#14
|
|||
|
|||
Eastman.
Not "the same" as a Martin, but every bit as good. |
#15
|
|||
|
|||
Welcome to the forum.
Check out the Martin Custom D on either the Guitar Center or Musician's Friend websites. It's an all-solid wood, sitka/mahogany dreadnought that is 90% the same guitar as a D-18, with a few minor exceptions: * simple dovetail neck joint * satin finish * 1 11/16" nut width * non-scalloped braces. It still has the great tone and playability as the D-18, but costs just under $1,000. I own one and love it. For me, it's preferable to a D-18 because of the narrower nut width.
__________________
1 dreadnought, 1 auditorium, 1 concert, and 2 travel guitars. |