The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Reply
 
Thread Tools
  #1  
Old 06-23-2022, 05:20 AM
david miles david miles is offline
Registered User
 
Join Date: Jan 2022
Posts: 4
Default X brace shape

Hello Forum.
Can anyone please tell me if it is usual to radius the bottom of X braces, or just leave them straight when gluing/clamping to soundboard?

David Miles.
Reply With Quote
  #2  
Old 06-23-2022, 08:56 AM
BradHall BradHall is offline
Charter Member
 
Join Date: Mar 2012
Location: Windsor, Ca.
Posts: 956
Default

“Radius the bottom “ of X braces? Never heard of anyone doing that and it would defeat the glue joint. If you meant the top side of the X brace then yes, many builders do radius them but not all.
__________________
BradHall

_____________________
Reply With Quote
  #3  
Old 06-23-2022, 09:14 AM
runamuck runamuck is offline
Registered User
 
Join Date: Jul 2006
Posts: 2,276
Default

Quote:
Originally Posted by david miles View Post
Hello Forum.
Can anyone please tell me if it is usual to radius the bottom of X braces, or just leave them straight when gluing/clamping to soundboard?

David Miles.
If you want a radiused top the X-brace should be radiused on the bottom. Many guitars are braced that way, often with a 28' radius, and some aren't and are built flat.
Reply With Quote
  #4  
Old 06-23-2022, 09:26 AM
kkrell's Avatar
kkrell kkrell is offline
Charter Member
 
Join Date: Jul 2012
Posts: 701
Default

Quote:
Originally Posted by david miles View Post
Hello Forum.
Can anyone please tell me if it is usual to radius the bottom of X braces, or just leave them straight when gluing/clamping to soundboard?

David Miles.
For an arched top, I would think you'd want all the braces (except the top brace under the fretboard) to be sanded on the bottom to match the top radius.
__________________
Kevin Krell, Executive Director, International Traditional Music Society, Inc.
A non-profit 501c3 charity/educational public benefit corporation
Wooden Flute Obsession CDs
https://www.acousticguitarforum.com/...d.php?t=572579
Reply With Quote
  #5  
Old 06-23-2022, 09:59 AM
warfrat73's Avatar
warfrat73 warfrat73 is offline
Charter Member
 
Join Date: May 2010
Location: Syracuse
Posts: 3,919
Default

Frequently, yes. Some more traditional designs are actually flat...

but, many "flattop" guitars have both a slightly radiused top and back, the x braces and whatever back braces are being used are sanded to the proper radius and then the top/back glued to them to create a slight arch.
__________________
"What have I learned but the proper use for several tools" -Gary Snyder

Bourgeois DR-A / Bowerman "Working Man's" OM / Martin Custom D-18 (adi & flame) / Martin OM-21 / Northwood M70 MJ / 1970s Sigma DR-7 / Eastman E6D / Flatiron Signature A5 / Silverangel Econo A
(Call me Dan)
Reply With Quote
  #6  
Old 06-23-2022, 11:10 AM
BradHall BradHall is offline
Charter Member
 
Join Date: Mar 2012
Location: Windsor, Ca.
Posts: 956
Default

I feel like an idiot for my reply. I thought you were talking about radius on the profile cross section. Sorry.
__________________
BradHall

_____________________
Reply With Quote
  #7  
Old 06-23-2022, 02:34 PM
david miles david miles is offline
Registered User
 
Join Date: Jan 2022
Posts: 4
Default X brace profile

Thanks everyone for your speedy reply's

David Miles ( UK )
Reply With Quote
  #8  
Old 06-23-2022, 02:54 PM
Tim McKnight's Avatar
Tim McKnight Tim McKnight is offline
AGF Sponsor
 
Join Date: Oct 2005
Location: Morral, Ohio
Posts: 5,929
Default

The overall amount of arch in the top is only one factor that affects the timber of the top. The flatter the brace generally results in a lower frequency response and the higher the arch will generally increase the frequency of the top. Other factors are in play and the brace archings aren’t the final authority but only one factor in the mix to be considered.

Research “bowed musical saw” playing and this may shed some additional light on your question.
__________________
tim...
www.mcknightguitars.com
Reply With Quote
  #9  
Old 06-28-2022, 12:32 PM
redir redir is offline
Registered User
 
Join Date: Aug 2011
Location: Mountains of Virginia
Posts: 7,657
Default

Quote:
Originally Posted by BradHall View Post
I feel like an idiot for my reply. I thought you were talking about radius on the profile cross section. Sorry.
Something about the way it was worded had me thinking the same thing though
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Thread Tools





All times are GMT -6. The time now is 03:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=