The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Reply
 
Thread Tools
  #1  
Old 03-08-2019, 01:48 PM
Ernesto Ernesto is offline
Registered User
 
Join Date: Dec 2017
Posts: 300
Default Build Thread: Lame Horse Saddle Pal Cedar / Koa

My dear acoustic friends,

I have been looking for a small bodied guitar for a long time now, something extraordinary and unique. After searching for quite a while I finally found: the Lame Horse Saddle Pal. Everybody who plays these little guys seems to fall in love, and Michael Watts’ favourable words here on the AGF, and also the fact that Todd Hallawell plays his Saddle Pal almost exclusively, made me pull the trigger and contact Chris Jenkins. Needless to say he’s great to work with. I send the poor man a ton of emails that he all responded very quickly and friendly.

The Saddle Pal is 12 frets to the body, usually with an elegant and subtle cutaway. It has adjustable playing action even under full string tension (an idiot-proof system -good for me- developed over the past 20 years or so), and a width at the lower bout of 13 inches. Although available with a traditional soundhole, Chris and Jeremy like to built this model with various soundholes and -ports that are placed on the upper part, including a non-traditional rosette. The scale length is 25.5, I guess that contributes to the loud and powerful sound.

This one is going to be special. We chose a Cedar top, but not any Cedar. Chris and Jeremy have their tops evaluated and measured by the Galloup School of Lutherie, using a specific rating system that has been mentioned by Tyler Robbins here on another thread. It works on a scale from 1-10, but higher ratings are possible. 10 or just above ten is already pretty darn good, and our Cedar top was rated 12,2 (!). Chris send me the corresponding certificate. I think at this time it was the highest rating they ever had, don’t know if it still is. What this basically means (I think) is that the stiffness to weight ratio is spectacular: light as Cedar and stiff as Spruce. Here it is:
Webp.net-compress-image.jpg

For the back and sides we chose a beautiful set of Koa with very good curl:
.archivetempkoay39.jpg

And here is the rosette design Chris send me (I told him I liked turquoise and corral, so he used these colors on a Koa background). The man is a true artista, I said to him it was perfect:
Webp.net-compress-image (1).jpg

More soon.

Last edited by Ernesto; 04-15-2019 at 11:56 AM.
Reply With Quote
  #2  
Old 03-08-2019, 02:08 PM
Nemoman Nemoman is offline
Charter Member
 
Join Date: Dec 2010
Location: N. California
Posts: 3,140
Default

Congrats on your new build!

The woods look wonderful--I'm sure it will turn out beautifully.

Wasn't able to see your rosette design--perhaps you didn't attach it!

Congrats again, and enjoy the ride!
__________________
2013 Stehr Auditorium (Carpathian/Myrtle)
2015 Stehr Auditorium (Adi/BRW)
2020 Baranik Meridian (Blue Spruce/Manchinga)
2020 Wilborn Arum (Tunnel 14/Coco)
2021 Kinnaird Graybeard (BC Cedar/Bog Oak)
2022 Kinnaird CS Student Build (Adi/Padauk)
2023 Kinnaird FS (Italian/Koa)
Reply With Quote
  #3  
Old 03-09-2019, 09:39 AM
Ernesto Ernesto is offline
Registered User
 
Join Date: Dec 2017
Posts: 300
Default

Quote:
Originally Posted by Nemoman View Post
Congrats on your new build!

The woods look wonderful--I'm sure it will turn out beautifully.

Wasn't able to see your rosette design--perhaps you didn't attach it!

Congrats again, and enjoy the ride!
Thanks! Yes, the woods are special. Chris will send more photos soon, I think he has already started the build...

Sorry for the confusion with the pics, I finally figured out how to insert images directly, should all be visible now.

Cheers

Last edited by Ernesto; 03-09-2019 at 10:01 AM.
Reply With Quote
  #4  
Old 03-09-2019, 08:41 PM
Steve Kinnaird's Avatar
Steve Kinnaird Steve Kinnaird is offline
AGF Sponsor
 
Join Date: Aug 2009
Location: Nacogdoches, TX
Posts: 3,601
Default

Chris is one of my best Texas-lutherie buds, and I'm quite familiar with his work.
That said, he never ceases to surprise me with his artistry and inventiveness.
Your rosette is a case in point--how does he think this stuff up?
This will be fun to watch, and you will have fun owning this! Congrats!

Steve
__________________
www.stephenkinnaird.com

Crafted in the Piney Woods
Reply With Quote
  #5  
Old 03-10-2019, 11:37 AM
Guitars44me's Avatar
Guitars44me Guitars44me is offline
Charter Member
 
Join Date: Feb 2014
Location: Mountains east of San Diego
Posts: 7,372
Smile Wow!

Very cool axe you have coming.
I would sure like to find out about the adjustable neck mechanism!
Anything idiot proof is right up my alley. Haha
John Kinnaird and I have been discussing such a neck for my next JK custom.
Chris, if you are reading this, is there any chance you would give JK the poop on your concept? I figure it never hurts to beg...

This one will be fun to watch

Paul
__________________
3 John Kinnaird SS 12c CUSTOMS:
Big Maple/Cedar Dread
Jumbo Spanish Cedar/WRC
Jumbo OLD Brazilian RW/WRC

R.T 2 12c sinker RW/Claro
96 422ce bought new!
96 LKSM 12
552ce 12x12

J. Stepick Bari Weissy WRC/Walnut

More
Reply With Quote
  #6  
Old 03-10-2019, 12:07 PM
tkoehler1 tkoehler1 is offline
Registered User
 
Join Date: Jul 2012
Location: Englewood, Ohio
Posts: 664
Default

Looks fantastic, can't wait to see it.

I myself am also a fan of offset sound holes, I think the design lends itself to a great guitar. I've had two and they've both been spectacular.


CHROMA 160815 11430 by Tristan Koehler, on Flickr


One thing I would consider, if I were to do another, is some sort of access hatch to get into the guitar, for future repairs, pick up installs, etc. I wonder if you have considered this. I know it adds complexity, and I don't have any good ideas on how to execute it. I just know that sometimes you want to get into the guitar, and it is harder to do so with the offset soundhole. In your case it looks like offset soundholes, which will look awesome but will preclude reaching into the guitar.

Just a thought.

TK
Reply With Quote
  #7  
Old 03-10-2019, 02:32 PM
SJ VanSandt SJ VanSandt is offline
Registered User
 
Join Date: Feb 2013
Location: Fort Worth, Texas
Posts: 2,124
Default

Quote:
Originally Posted by tkoehler1 View Post
Looks fantastic, can't wait to see it.

One thing I would consider, if I were to do another, is some sort of access hatch to get into the guitar, for future repairs, pick up installs, etc.

TK
I think Lamehorse always has an access panel, and usually one as creative and visually appealing as the soundhole. Check out the website: really gorgeous and unusual guitars.

https://lamehorse.net/saddle-pal
__________________
Hatcher Woodsman, Collings 0002H, Stella Grand Concert
Reply With Quote
  #8  
Old 03-10-2019, 02:58 PM
Ernesto Ernesto is offline
Registered User
 
Join Date: Dec 2017
Posts: 300
Default

Quote:
Originally Posted by Steve Kinnaird View Post
Chris is one of my best Texas-lutherie buds, and I'm quite familiar with his work.
That said, he never ceases to surprise me with his artistry and inventiveness.
Your rosette is a case in point--how does he think this stuff up?
This will be fun to watch, and you will have fun owning this! Congrats!

Steve
Thanks, Steve! And you're right, when he send me the rosette design, I was actually asking me the same question

Quote:
Originally Posted by Guitars44me View Post
Very cool axe you have coming.
I would sure like to find out about the adjustable neck mechanism!
Anything idiot proof is right up my alley. Haha

Paul
Yes, their system is the best. I think they used it from the beginning, and have improved it over the years.

Quote:
Originally Posted by tkoehler1 View Post
Looks fantastic, can't wait to see it.

One thing I would consider, if I were to do another, is some sort of access hatch to get into the guitar, for future repairs, pick up installs, etc. I wonder if you have considered this. I know it adds complexity, and I don't have any good ideas on how to execute it. I just know that sometimes you want to get into the guitar, and it is harder to do so with the offset soundhole. In your case it looks like offset soundholes, which will look awesome but will preclude reaching into the guitar.

Just a thought.

TK
Good thought, and indeed all Lamehorse guitars have an access panel, as has been said. The panels usually look as stunning as the rest of the guitar.

Your guitar looks beautiful. What is it?

Quote:
Originally Posted by SJ VanSandt View Post
I think Lamehorse always has an access panel, and usually one as creative and visually appealing as the soundhole. Check out the website: really gorgeous and unusual guitars.

https://lamehorse.net/saddle-pal
Indeed they have.
Reply With Quote
  #9  
Old 03-10-2019, 08:15 PM
tkoehler1 tkoehler1 is offline
Registered User
 
Join Date: Jul 2012
Location: Englewood, Ohio
Posts: 664
Default

Ah you've got the access hatch covered - very clever of them to include that as standard. You really do need it with offset sound holes.

My guitar - yeah thanks it was awesome. Here's the build https://www.acousticguitarforum.com/...d.php?t=443382

TK
Reply With Quote
  #10  
Old 03-10-2019, 08:30 PM
TomB'sox's Avatar
TomB'sox TomB'sox is offline
Moderator
 
Join Date: Dec 2014
Location: The Lone Star State
Posts: 13,447
Default

I have one as well, bought at Woodstock from Chris a couple of years ago, it is a work of art. Enjoy your build, the process is as much fun as the guitar will be.
__________________
PS. I love guitars!
Reply With Quote
  #11  
Old 03-15-2019, 01:12 PM
Ernesto Ernesto is offline
Registered User
 
Join Date: Dec 2017
Posts: 300
Default

Quote:
Originally Posted by TomB'sox View Post
I have one as well, bought at Woodstock from Chris a couple of years ago, it is a work of art. Enjoy your build, the process is as much fun as the guitar will be.
Photos please
Reply With Quote
  #12  
Old 03-15-2019, 01:23 PM
Ernesto Ernesto is offline
Registered User
 
Join Date: Dec 2017
Posts: 300
Default

Chris send some photos of the back and sides sanded to 80 grit. Even at that rough grit, the wood shows a lot of color and curl. Chris said it should really look great under finish:
Webp.net-compress-image (1).jpg

Last edited by Ernesto; 04-15-2019 at 11:57 AM.
Reply With Quote
  #13  
Old 03-16-2019, 11:55 AM
jcjenkins3's Avatar
jcjenkins3 jcjenkins3 is offline
AGF Sponsor
 
Join Date: Sep 2011
Location: Mansfield, TX
Posts: 66
Default

Lame Horse is always happy to share the details of the adjustable playing action mechanism. It would be an honor to have John Kinnaird, brother of my good friend, Steve, use it. It is pretty fool proof, and very user friendly - if I do say so myself.

Last edited by jcjenkins3; 03-16-2019 at 12:03 PM.
Reply With Quote
  #14  
Old 03-16-2019, 01:09 PM
TomB'sox's Avatar
TomB'sox TomB'sox is offline
Moderator
 
Join Date: Dec 2014
Location: The Lone Star State
Posts: 13,447
Default

Quote:
Originally Posted by Ernesto View Post
Photos please
lamehorse.jpg

lamehorse2.jpg

lamehorse4.jpg

lamehorse5.jpg

lamehorse3.jpg
__________________
PS. I love guitars!
Reply With Quote
  #15  
Old 03-16-2019, 02:00 PM
doodahdoug doodahdoug is offline
Charter Member
 
Join Date: Jun 2011
Location: Dallas, Texas
Posts: 1,216
Default

Whoa, beautiful example of the Saddle Pal Tom! Best of luck with your build Ernesto!
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Thread Tools





All times are GMT -6. The time now is 12:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=