#1
|
|||
|
|||
Will putting electric guitar strings on a acoustic guitar play like an electric?
Iv got some hand issues and need something easier to play. Iv set my action incredible low on my marton d1 and am wondering what the effect of putting electric strings on it and if it would play like an electric guitar. This is only playability, not sound at all.
Thoughts? |
#2
|
|||
|
|||
It might play like an electric.
It might also sound like garbage. |
#3
|
|||
|
|||
Ages ago I put a set of 9s on my acoustic guitar. Bends were really slick, but overall it sounded AWEFUL.
__________________
Eastman AC422CE - sitka & rosewood '86 Guild D-25 - spruce & mahogany Taylor GS Mini - spruce & rosewood Eastman MD-514 Mandolin - spruce & maple Kentucky KM-250 Mandolin - spruce & maple |
#4
|
|||
|
|||
In my much younger days I sometimes did things like boil strings to save money or put Ernie Ball slinkys on my acoustic guitar because that was all I had around. 10s actually didn’t sound as bad as you would think.
|
#5
|
|||
|
|||
wont give the results you like
you could get a lighter set of strings. (10s??) the lighter strings will not produce the volume and drive the top so you might be missing some of that, but they will be easier to play. on the otherhand, lets say if you use an acoustic amp and I'm not saying you need one, but if you have one and rarely use,, the lighter string gauge effect on the guitars tone would be less noticeable
__________________
Ray Gibson SJ200 Taylor Grand Symphony Taylor 514CE-NY Taylor 814CE Deluxe V-Class Guild F1512 Alvarez DY74 Snowflake ('78) |
#6
|
|||
|
|||
Have you tried any Extra Light 10-47 acoustic strings? I know Martin, Elixir and D'Addario (and probably other) make them.
Failing that, I don't see why you couldn't put a set of 09-42 electric strings on, but I suspect it will be very uninspiring to play that way. And the intonation probably won't be all that great, but I suspect you're not playing way up the neck anyway if you have hand problems. |
#7
|
|||
|
|||
Maybe you could tune down a 1/2 step?
|
#8
|
|||
|
|||
I can help you out here - I've long been on a search for acoustic strings that will be easier on my hands.
There is a definite trade off in using lighter gauge strings. It's absolutely true that the lighter strings will not drive the guitar top as much as heavier strings. This is really ok with me though, the sound is fine, and if the guitar has a pickup and is plugged in, really not a problem. Also, with lighter gauge strings, it is possible to press a string in a chord too hard and make a note go sharp. It's an easy playing adjustment though. And lastly, lighter gauge strings won't pull on the guitar neck as much as heavier strings, so a small neck adjustment may be needed. Here's what I'm currently using. One of my guitars has GHS Silk and Steel strings, "Light" gauge, from 10-42. These are "round core" strings, instead of "hex core", and are said to be lower tension than hex core. A couple of other gauges are available. https://www.pitbullaudio.com/ghs-str...ngs-10-42.html I really like these. The "silk and steel" will sound a little mellower than phosphor bronze strings, which I like, but is a personal preference. On another guitar, I have GHS "Thin Core Phosphor Bronze" strings, "Ultra Light" gauge, 10-41. These are also "round core" strings, and said to be lower tension than hex core strings. I like these also, and they have the familiar phosphor bronze sound. A couple of other gauges are available. https://www.pitbullaudio.com/ghs-tcb...ght-10-41.html And, yes! - you'll be able to bend strings very much like when playing your electric guitar. The good news is, trying different strings is easy and not expensive. I hope this helps! |
#9
|
|||
|
|||
Quote:
You could combine two good pieces of advice others gave you: (1) go with a very light gauge of acoustic strings (say a .010 set) and if that's not enough, (2) tune down a half-step to ease the tension. If that's not enough, then yeah you could go to an electric .009 set but personally that'd be my last resort. I take you at your word that you're not worried about how it sounds. |
#10
|
||||
|
||||
some very "sound" advice...yes im a punny guy.
lighter gauge acoustic strings tune down full step & capo use low tension strings- like newtone low tensions silk and steels check that git is set up for max action, if you fingerpick action can be set lower, if you strum youll need it a little higher, but ill assume the first is your case (fingerpicker) lower action will make it easier on fretting hand as well again, any sacrifice on gauge can be proportional to loss in driving top.
__________________
Don 1929 SS Stewart Pro Archtop 1921 G Houghton Archtop Banjo 2007 George Rizsanyi Custom Maple Banjo Killer 2017 James Malejczuk Custom OM Black Limba 1980 Norman B50-12 Norman B-20 Recording King single 0 1996 Takamine 1967 Yam G-130 Melvina 1980s Seagull S6 Cedar 2003 Briarwood 1970s Eko Maple 1982 Ovation 2020 Fender Telecaster Mandolin Yam THR5A Sienna 35 Kustom |
#11
|
|||
|
|||
Quote:
the instrument is hard enough to learn and play already, no need to make it harder fighting with the string tension. set em up with anything that works and play daily
__________________
Ray Gibson SJ200 Taylor Grand Symphony Taylor 514CE-NY Taylor 814CE Deluxe V-Class Guild F1512 Alvarez DY74 Snowflake ('78) |
#12
|
|||
|
|||
If silk & steel doesn't get you there, take it to a competent repair person and have it set up properly. If you explain your situation, then he should be able to set it up for your needs. I'm assuming because of your hand issues that you're willing to live with the tradeoffs. Most important is getting the nut height properly set up. After that, getting the relief and action height. Yes, if you're driving lower gauge strings the top will not perform acoustically like a heavier string will.
If you just can't play anything resembling a 100% acoustic guitar, consider picking up an amp. Piezo pickups have their own tradeoffs, but they're not really relying on you to be able to drive the top. Lots of folks use amps on acoustic guitars even at home. Especially if they're playing with loopers and such. Setting up 11's or even 10's with super low action - and using the amp for volume should get you there if you can play electric guitars. |
#13
|
|||
|
|||
Will putting electric guitar strings on a acoustic guitar play like an electric?
Quote:
In short, it does - kinda - and it does, big time...
__________________
"Mistaking silence for weakness and contempt for fear is the final, fatal error of a fool" - Sicilian proverb (paraphrased) |
#14
|
|||
|
|||
I'll add one more note. When trying to use electric guitar strings, the unwound G will be the trouble maker.
My experience was that the unwound G just would not intonate correctly. Early on, I experimented with electric guitar strings, then experimented with putting together a custom set of acoustic strings with an unwound G, and even tried a graphtech saddle that was compensated for the B and the G strings. Just never worked well for me. I've now arrived at the "silk and steel" set and the "thin core phosphor bronze" set that I mentioned earlier. I'm happy with these, but certainly open to other options. |
#15
|
|||
|
|||
Oh man Im sorry guys thanks for your responses but Im just getting back to this. Iv got really bad tinnitus and I cant think right.
Cant tune down half step cause I love to play along with people on the radio or learn a song. The action point and the angle of the neck is important. Now with my tinnitus Im leaning to a telecaster. It sucks I love acoustic but its creating too much vibration. My little finger is bone on bone (was shattered) and is excoriating to play with, why I was trying to string my martin with the d'adarios. And Im on lightest gauge strings I can get. Always extra light or custom light. Im bummed Im just getting back to this, you all had such good info. To the point of me not putting the electric strings on my martin. |