#1
|
||||
|
||||
Saddles & Beads
Are the same things we tend to read about the benefits of various saddle materials also true on nylon string guitars? In other words, do the unwound nylon strings react any differently than the wire strings on a steel string guitar?
Next item - Has anyone tried tieing knots in one end of their strings, then running the string through a wood or glass bead to hold it at the bridge instead of tieing it at the bridge? In a different guitar forum, we've been discussing it as a utility that is easier than tieing, but does anyone know whether there is a tonal difference to be perceived? Thanks, Dennis
__________________
|
#2
|
|||
|
|||
From the forum discussions I've read, there's no functional advantage or disadvantage to using saddle beads. Personally, I think they're ugly and I don't have a problem tying strings at the saddle. Here's an excellent nylon stringing method that I've found very effective:
http://www.schrammguitars.com/stringingmethod.html |
#3
|
|||
|
|||
Beads? I never heard of that before? Any pics?
__________________
Lady Toni Gibson Hummingbird True Vintage CV Precision Basses (2) |
#4
|
||||
|
||||
__________________
Waddy |
#5
|
||||
|
||||
I don't have any pics because I abandoned the idea when the wooden beads I bought turned out to be too soft and split as the strings were tightened.
The subject arose when one of the members of the other forum was looking for a solution to a shallow break over the saddle. The wrapping apparently lifted the string slightly, so tieing a knot in the end of the string and using a little bead like the ball end of a steel string worked for him. His worked because he had glass beads where my wooden beads were too soft.
__________________
|
#6
|
||||
|
||||
Quote:
__________________
|
#7
|
|||
|
|||
I just tie mine, it took a couple tries when I first was starting but even I quickly got the idea after a bad tie or two came undone and slapped across my face while attempting to get tension.
__________________
TAKAMINE TC135SC TAKAMINE EAN70C |
#8
|
||||
|
||||
Quote:
For those who are interested, here is a really good tutorial on an excellent stringing method for standard tie blocks. It is effective and neat. http://www.schrammguitars.com/tutorial.html
__________________
Waddy |
#9
|
||||
|
||||
I tie a knot on the 1st and 2nd string because of this increases the saddle breakover angle for these two strings. I found the breakover angle was a little shallow prior to employing this technique because the traditional wrap method allowed the string pull up slightly between the tie block and saddle.
I tried beads and didn't notice too much difference.
__________________
Martin 000-28EC, Taylor 12fret Cedar/Mahogany, Taylor GC8, Carvin AC275, Takamine TC135SC, Yamaha APX5na |