The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Carbon Fiber

Reply
 
Thread Tools
  #1  
Old 12-17-2021, 11:52 PM
Pine Cone Pine Cone is offline
Charter Member
 
Join Date: Dec 2018
Location: Eastern Idaho
Posts: 93
Default Emerald X20 First Anniversary Thoughts

Last year on this date I was waiting for my new Emerald X20 guitar to arrive. It was a stock guitar with a Royal Ebony veneer and I was able to get them to install an LR Baggs Anthem SL pickup in it. Only two or three more days to go....

Like most Emerald buyers, I had played carbon fiber guitars before but had seen or played an Emerald in the flesh. I did already own a Journey OF660 carbon fiber travel guitar.

My thoughts after a year’s ownership are mostly positive.

The guitar arrived pretty much in tune, which was impressive, and after a year’s use it is pretty much always in tune unless there are major temperature changes. This is great for a performance guitar, less important for a jamming guitar.

It is great looking guitar. Spending extra for the top veneer was worth it for me. An identical or near identical guitar shows up on Emerald’s custom builder website so Alistair must like the look as well.

Playing comfort is amazing. Wonderful to play for hours on end. When playing in a chair the sound-hole is pretty close to my ears and can make the guitar pretty loud.

Some of the musician’s I have played with are not carbon fiber guitar fans. The feeling I got was unexpected. I play a lot with the bluegrass and old time crowd I guess for many of them if it is not wood is is not really a guitar. I went back to playing my Martin HD-28 with them...

The electronics are great. The Baggs Anthem SL pickup sounds good and has been reliable.

The pin-less bridge is not a plus. Maybe it makes the guitar sound better, but I will never know. For anyone used to pinned bridges, string changes are more difficult with the Emerald bridge. The Emerald pin-less bridge does look great, and I have learned how to make it work.

It doesn’t sound like my wooden guitars, but it does sound good. Amplified it sounds very good. Great to just plug in and play, no worries about being the right distance from the microphone. It also sounds very good with a single condenser microphone setup, possibly because of the sound-hole position on the upper part of the body.

Where does it really shine?

Fabulous practice guitar because of all the curves and bevels which makes it very comfortable to play.

Awesome performance guitar. Set it and forget it. Tuning stability is great, the Hiscox case is great (but I wish it was white not black), minimal worries about temperature and humidity changes since the guitar is carbon fiber. Great pickup for stage use.

I posted a video in the “Show and Tell” section here of me fingerpicking and singing “Darcy Farrow” on this guitar.

https://www.acousticguitarforum.com/...d.php?t=634326

Would I buy it again? YUP!
__________________
Martin 000-17 SM
Martin HD-28M
Lots of loud banjos
Reply With Quote
  #2  
Old 12-18-2021, 04:26 AM
RP's Avatar
RP RP is offline
Charter Member
 
Join Date: Dec 2006
Location: Charlottesville, VA
Posts: 19,026
Default

Happy Anniversary. She's a beaut, and you play her very well....
__________________
Emerald Amicus
Emerald X20
Emerald X20-12
Fender Robert Cray Strat
FOR SALE Taylor 524 First Edition https://www.acousticguitarforum.com/...d.php?t=647040
Reply With Quote
  #3  
Old 12-18-2021, 05:46 AM
kitesurfer kitesurfer is offline
Registered User
 
Join Date: Apr 2012
Location: jacksonville, fla
Posts: 90
Default

i love the pinless bridge on my x20. i've not changed the strings on my Amicus yet, but i suspect the pinless bridge won't cause me issue. bear in mind that the first 50 years of my playing, i put a nickel on the end of my finger to push the pins out from the inside when i got rich, i bought a winder
__________________
TAYLOR 110 , 514ce, 564ce 12 string, X20, Amicus
Reply With Quote
  #4  
Old 12-18-2021, 10:21 AM
ZebraKing ZebraKing is offline
Registered User
 
Join Date: Jul 2019
Posts: 80
Default

Wow thanks for the insight! Very applicable to my X20 that
I just received. I've been playing a Martin HDC-28 for the past few years but l wanted something more stable and comfortable to play out with.

I went with the Ghost+KK pickups. Sounds good, but need to put on some better strings. Also the intonation seems a bit off so will need to tweak the adjustable bridge. Other than that just incredibly impressed.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Carbon Fiber

Thread Tools





All times are GMT -6. The time now is 08:37 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=