#1
|
|||
|
|||
Looking for reversible weak pickguard adhesive for 2020 Nitro PRS
Hi All,
My new 2020 PRS S2 McCarty Thinline is showing light pickmarks (from gigs played standing) and I thought a pickguard might be warranted. The dimensions on a standard Gibson Les Paul pickguard fit the PRS pickup spacing and I thought I could take an inexpensive Les Paul pickguard and trim the rest of it to my tastes. Ideally I could get something tacky enough to hold it in place; possibly just for the duration of a standing gig. Maybe 3M has the right product??? Thanks, Jon
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#2
|
|||
|
|||
Have you considered a static cling vinyl pick guard? They do not have any adhesive. However, they will have a reaction with nitro finishes if left on too long.
|
#3
|
|||
|
|||
Yes I made one. Realized it would react and took it off, but could just leave it in the case and install when needed. Probably the best solution.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#4
|
|||
|
|||
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |