The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 05-25-2019, 07:46 PM
jwayne jwayne is offline
Registered User
 
Join Date: Jun 2010
Posts: 410
Default Yeah, that didn't last long...

Bought a used Bedell MB-17-6 (from their short-lived Chinese import line) about a year ago. Had an obvious bridge repair and slight upward bow but got it cheap and it played and sounded nice. Messy glue around the bridge plate, luthier checked out instrument and felt it was solid.

For the most part it was a pretty wall hanger, and usually kept in lower tension DADGAD.

Took it down to play recently and WHA?? The bridge is pulled up, the wood is splintered and there is a crack at the right.





Took a long time to get the bridge off, wanted to minimize any further splintering. But it is in pretty bad shape. It's a solid top and there are some paper thin areas of wood (mostly past the bridge plate & brace underneath).



The bridge plate in good shape but with a gap that would need to be glued down:



I'm not going to put much money & energy into this but any suggestions of what I can do on the cheap or a way to musically repurpose this?
Reply With Quote
  #2  
Old 05-25-2019, 07:56 PM
mirwa mirwa is offline
Registered User
 
Join Date: Sep 2013
Posts: 3,109
Default

Put the bridge in place with a couple of bridge pins, drill two holes through the bridge and into the top behind say pins 1/2 and 5/6, Mix some epoxy up, smear it under the bridge, bolt the bridge down with small bolts

Leave 24-48hrs for epoxy to dry, string it up keep playing

Steve
__________________
Cole Clark Fat Lady
Gretsch Electromatic
Martin CEO7
Maton Messiah
Taylor 814CE
Reply With Quote
  #3  
Old 05-26-2019, 12:05 PM
jwayne jwayne is offline
Registered User
 
Join Date: Jun 2010
Posts: 410
Default

Quote:
Originally Posted by mirwa View Post
Put the bridge in place with a couple of bridge pins, drill two holes through the bridge and into the top behind say pins 1/2 and 5/6, Mix some epoxy up, smear it under the bridge, bolt the bridge down with small bolts

Leave 24-48hrs for epoxy to dry, string it up keep playing

Steve
Yeah, this will do it? Should I prep the splintered area first? And shouldn't I do something about the bridge plate gap as well? (I'd have to buy clamps I think. )

Also wondering about the JLD Bridge Doctor. Only $22 and this would also keep the top bow in check.

Tanks.
Reply With Quote
  #4  
Old 05-26-2019, 03:43 PM
printer2 printer2 is offline
Registered User
 
Join Date: Dec 2012
Location: Middle of Canada
Posts: 5,098
Default

Looks like the bridge may have let go because the plate was not solid. Glue it up first then do the bridge as described.
__________________
Fred
Reply With Quote
  #5  
Old 05-26-2019, 05:27 PM
redir redir is offline
Registered User
 
Join Date: Aug 2011
Location: Mountains of Virginia
Posts: 7,657
Default

It does indeed look like the bridge plate is coming off too. None the less I'd do pretty much what Steve suggested and see how much longer you get out of it. Just don't use cheap 5-minute hardware store epoxy.
Reply With Quote
  #6  
Old 05-28-2019, 04:14 AM
Quickstep192 Quickstep192 is offline
Charter Member
 
Join Date: Aug 2002
Posts: 1,656
Default

I’m curious why you guys aren’t suggesting that he clean up the old glue residue before re-gluing.
Reply With Quote
  #7  
Old 05-28-2019, 04:52 AM
jwayne jwayne is offline
Registered User
 
Join Date: Jun 2010
Posts: 410
Default

Quote:
Originally Posted by Quickstep192 View Post
I’m curious why you guys aren’t suggesting that he clean up the old glue residue before re-gluing.
FYI, there is no old glue residue left. And the saddle has been sanded clean.
Reply With Quote
  #8  
Old 05-28-2019, 09:14 AM
Big Band Guitar Big Band Guitar is offline
Registered User
 
Join Date: Mar 2017
Posts: 1,031
Default

Nylon bolts and nuts are the lightest you can get.

I have replaced the bridge pins with the nearest size bolt and nut.

https://www.boltdepot.com/Machine_sc...Nylon_6_6.aspx

Stringing and restringing is a pain but it works.
__________________
"My opinion is worth every penny you paid for it."

"If you try to play like someone else, Who will play like you". Quote from Johnny Gimble

The only musician I have to impress today is the musician I was yesterday.

No tubes, No capos, No Problems.

Last edited by Big Band Guitar; 05-28-2019 at 09:20 AM.
Reply With Quote
  #9  
Old 05-28-2019, 05:03 PM
runamuck runamuck is offline
Registered User
 
Join Date: Jul 2006
Posts: 2,276
Default

Do what Mirwa says and make sure the epoxy you use is not the quickset, 5 minute type.

Also, I think Mirwa, when he recommended bolting down the bridge, meant that as a way to clamp it until the glue sets, and then remove them.
Reply With Quote
  #10  
Old 05-30-2019, 07:31 AM
jwayne jwayne is offline
Registered User
 
Join Date: Jun 2010
Posts: 410
Default

Any reason why folks are recommending epoxy rather than Tite Bond wood glue?
Reply With Quote
  #11  
Old 05-30-2019, 07:37 AM
runamuck runamuck is offline
Registered User
 
Join Date: Jul 2006
Posts: 2,276
Default

Quote:
Originally Posted by jwayne View Post
Any reason why folks are recommending epoxy rather than Tite Bond wood glue?
Aliphetic resins, like Titebond, only properly adhere to raw wood and are strong in joints where there are no gaps.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Thread Tools





All times are GMT -6. The time now is 06:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=