The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Acoustic Amplification

Reply
 
Thread Tools
  #16  
Old 04-15-2018, 09:58 AM
lkingston lkingston is offline
Registered User
 
Join Date: Dec 2009
Location: Asheville North Carolina
Posts: 2,221
Default

In order to use one of these mixers you really have to make sure you pick compatible mics and guitar preamps. You can’t just plug a guitar into it or grab any old dynamic mic. For instance the levels from a Shure SM7 or an Audix OM7 are going to be too low and there is no way to add preamp gain. If you have a guitar preamp with a variable gain output and Shure Beta58s or dynamic mics with similar output levels this mixer can be quite nice. The reverb is mediocre, but I use very little reverb.
Reply With Quote
  #17  
Old 04-15-2018, 10:17 AM
hotroad hotroad is offline
Registered User
 
Join Date: May 2016
Location: Norwegian Cruise Lines
Posts: 1,597
Default

I agree with you about the issue with mics though I have three vocal mics that work great and with my guitars its several different systems that work well. Like all music stuff, we try it out and see if it works. Thats why I have a room full of stuff that didn't.
But the tone on my Martin D-28 plus my vocal using my mics is as good as I have heard using any equipment and I have tried a lot of whats out there from the big guys and some small ones too like Shertler.
Note: The Mackie Pro DX does not supply phantom power. I sure wish they did so condenser mics could just plug in. I use a DPA 4099 on my Martin and have to go through an outboard phantom supply then into the Mackie. Same with vocal mics, can't use condensers unless there is an outboard source of phantom.
Reply With Quote
  #18  
Old 04-15-2018, 10:18 AM
hotroad hotroad is offline
Registered User
 
Join Date: May 2016
Location: Norwegian Cruise Lines
Posts: 1,597
Default

About gain structure, I use 1/4" to XLR for the inputs for my guitar and this works well.
Reply With Quote
  #19  
Old 01-12-2021, 05:20 PM
Monk of Funk Monk of Funk is offline
Registered User
 
Join Date: Jan 2013
Posts: 885
Default

I got a hold of this mixer, and I haven't tried plugging any SM58 into it, but I expect that with the mixer plugged into my interface that should work ok.

One problem I'm having though, is that my bluetooth connection will only stream audio through the right channel in mono. Has anyone had any experience with this? It looks like the bluetooth should connect on track 7/8 which should be stereo. If I plug a 3.5mm jack into the mixer this works just fine in stereo, which replaces the wireless connection.

Any ideas?

EDIT: It's actually coming through on both channels but one channel is all low pas filtered and quiet.
__________________
Miles in your shoes An original production on Soundcloud.

Last edited by Monk of Funk; 01-12-2021 at 05:30 PM.
Reply With Quote
  #20  
Old 01-12-2021, 09:33 PM
rockabilly69 rockabilly69 is offline
Registered User
 
Join Date: Jan 2010
Location: Ogden, Utah
Posts: 2,527
Default

Digital mixers have been around for a long time, since the 90's. Their power is undeniable. I own two of them, a QSC Touchhmix 8 and a Bose T1. I also used to have the 16 channel 4 buss Presonus Studiolive, Of them all, I think the Bose T1 is the easiest to use in a live situation, but I will take an Allen and Heath ZED FX over any of them all day long. I think they sound great, and operating the tone controls and FX in real time is just way easier for me. In many of my gigs the room can go from empty to full in a heartbeat, and it's easier for me to adjust analog controls to keep the sound in check.
Reply With Quote
  #21  
Old 01-13-2021, 06:15 PM
Monk of Funk Monk of Funk is offline
Registered User
 
Join Date: Jan 2013
Posts: 885
Default

Sure, but the sound on the stage, isn't the sound you want, actually, which is why this comes in handy, you can sit in the right part of the room and adjust your mix.

Sadly, this mixer doesn't have any pan controls, which is unbelievable to me.
__________________
Miles in your shoes An original production on Soundcloud.
Reply With Quote
  #22  
Old 01-13-2021, 07:53 PM
rockabilly69 rockabilly69 is offline
Registered User
 
Join Date: Jan 2010
Location: Ogden, Utah
Posts: 2,527
Default

Quote:
Originally Posted by Monk of Funk View Post
Sure, but the sound on the stage, isn't the sound you want, actually, which is why this comes in handy, you can sit in the right part of the room and adjust your mix.

Sadly, this mixer doesn't have any pan controls, which is unbelievable to me.

When you're a solo like me, you can't leave the stage to change your sound, but I can deal with problem frequencies. I know the rooms that I play, I've been a house guitarist in each of them for over 10 years. I pretty much know how the stage sound translates.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Acoustic Amplification

Tags
digital, mackie, mixer, simple

Thread Tools





All times are GMT -6. The time now is 03:15 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright ©2000 - 2020, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=