#106
|
|||
|
|||
D'Addario micro headstock tuner. Love how compact and low profile it is.
|
#107
|
|||
|
|||
A new Scotty Cameron putter. My J45 loves it!
|
#108
|
|||
|
|||
My Seagulls usually wear D'Addario EJ-16s, but I grabbed a couple sets of Strings By Mail PB lights to try out...
__________________
An Alvarez and a couple Seagulls |
#109
|
||||
|
||||
Strings, picks, a metronome, tuner and capo.
I did a video on this on my youtube channel you might like https://youtu.be/SU8sIsuWyBY |
#110
|
|||
|
|||
Got a new Collings CJ35, so I bought a wooden stand, capo for a thicker neck, Collings picks and a Collins shirt and cap for me.
__________________
2022 Martin D28 Modern Deluxe 2022 Collings CJ35 1998 Gibson SJ200 Various other acoustics Various electric guitars and amps |
#111
|
|||
|
|||
A couple of beautiful, all handcrafted leather straps from Heistercamp. They should last a lifetime.
I discovered Designacable and have been replacing all of the leads in my live solo set up with custom made stuff so that there's no excess cable hanging down when I rig my Fishman Expand unit on the mic stand, and my DI's on the mount at the base of the stand. All Neutrik connectors and good cabling.
__________________
Rick Yamaha MIJ CJX32 Avalon L32 Avalon A32 Legacy Lowden 022 Gibson J-185 Takamine TNV360sc Cole Clark Fat Lady 3 |
#112
|
|||
|
|||
My purchases in the last few weeks have been
* a Schubb S1 - which is light years better than the old capo I had that wasn't pressing down on the Es any more. The only bummer is I need two hands to put it in place * some ebony pins for my OM to replace the plastic ones * Dunlop 65 and Ax Wax |
#113
|
|||
|
|||
Ordered yesterday, Custom Inlay buffalo horn bridge pins for my MacMillan slope dread
|
#114
|
|||
|
|||
Bought some unbleached bone nuts and saddles , 10 packs of each ... Also some pickguard material ... This will be used for an Alvarez Md60bg , I plan on doing a thorough setup with the a new nut and saddle , also plan on making a Guild shape pickguard for it , if I end up liking the guitar more after I get it all setup better , if I don't I'll just sell it . I could of just sanded down the saddle a tad bit , but I didn't like how the nut seemed unevenly sanded on one side from the factory so I got some new stuff coming to mess around with . May get some nut files to will see ...
|
#115
|
||||
|
||||
I received in the mail a new set of Gotoh SE-700, Gold tuners for my Eastman E40-0M to replace the stock cheaper chrome Gotoh tuners. Unfortunately they were only an almost fit. The bottom holes were perfect but the top screw holes were about 1.5 mm off. I filled the old holes (toothpikcs were a perfect fit) then drilled and installed the tuners and bushings. And Boy do they look great on an already great looking and sounding guitar.
__________________
2012 Eastman E20om 2017 Eastman E40om SB |
#116
|
|||
|
|||
A SageWork Umbra guitar support. With a NC finish on my Cervantes I didn't want to risk using my Neck-Up with suction cups.
__________________
Larry Martin OM-28 Authentic 1931 Taylor Cocobolo GCce 2008 Fall Limited Edition Paragon Cocobolo/cedar GOM Cervantes Signature Rodriguez Eastman Cabaret JB Tacoma JM1612C |
#117
|
||||
|
||||
Now I'm buying finger and thumb picks in a bit of a shark feeding frenzy
I just ordered some backups to the picks I found that I really feel comfortable with
__________________
Barry My SoundCloud page Avalon L-320C, Guild D-120, Martin D-16GT, McIlroy A20, Pellerin SJ CW Cordobas - C5, Fusion 12 Orchestra, C12, Stage Traditional Alvarez AP66SB, Seagull Folk Aria {Johann Logy}: |
#118
|
|||
|
|||
2 packs of DR Sunbeams. 11's, 1 pack of Sunbeams .12's, 1 pack of Martin Monels. 11's.
|
#119
|
|||
|
|||
A fancy truss rod wrench
__________________
2022 Martin D28 Modern Deluxe 2022 Collings CJ35 1998 Gibson SJ200 Various other acoustics Various electric guitars and amps |
#120
|
||||
|
||||
Not everyone likes an unwound/plain 3rd string, but I do. As a rock and blues electric player for over half a century, that style remains embedded in my acoustic playing with lots of aggressive note bending. Of course, I use a B and G compensated nut for intonation on all my acoustics including the newest wooden box. Easily done for any acoustic. I get a Graph Tech Tusq nut, carefully sand the bottom flat (in a flat vise) to achieve the proper height, then file it 25% thinner at the base to fit into the extra-narrow bridge slot of an Eastman AC422CE.
https://reverb.com/item/38598-graph-...ompensated-b-g Oh yeah, and a pack of Dunlop .73mm yellow picks, keeping a couple in those little pockets of all my shorts and jeans, and a few spares in the wallet. Just in case. Last edited by tinnitus; 08-16-2022 at 12:13 AM. |