#1
|
|||
|
|||
Help with making cutaway
I decided that for third guitar I would love to make cutaway - but I never done it.
I was looking at the cutaways in store - I like the smooth venetian not the other pointy one. The bending is not a problem, but I have questions about the neck area. Some use normal heel and some use a wide heel that is straight and as wide as the whole fingerboard and then the cutaway flows from it. What are the chalenges to do a cutaway? (Appart of the obvious bending) How should I modify my process in order for cutaway? Any advice/pictures appreciated.
__________________
My Guitars: -Lucida $60 new with soundport arguably now plays like $85 one -LaPatrie Presentation, factory rejected -Takamine AN10 - My own build DeJonge Standard Steel String - My own build Santos Hernandez cypress flamengo - My own build Bubinga Tornavoz classical - My own build Hammered Dulcimer - My own build Travel Guitar |
#2
|
|||
|
|||
You might get more help if you post this in the DIY Guitar forum also.
|