|
|
#1
12-30-2018, 06:05 PM
|
|||
|
|||
Fixing Guitar Back Warp
I bought 2 sets of Cocabola backs & sides. They started to Warp just a bit. Nothing major. In an attempt to fix I acquired 2 melamine boards 16”x36”.
I wiped down one set of backs with a damp cloth (no excess H2O) and sandwiched the set between the melamine. I used some medium large alligator clamps to apply slight pressure as I was concerned to much weight might crack the boards. (See pics) I’ll let you know how it turns out. Any thoughts. https://pin.it/cbbdbp6jenciop https://pin.it/6arsbcylts6bco Kinda new at this, but hope it helps. Last edited by SGF_MO; 12-30-2018 at 06:07 PM. Reason: Link issue 
|
|
#3
01-03-2019, 08:27 PM
|
|||
|
|||
warped wood
In my experience, one a board or skin takes on a bend it is almost impossible to get it out. I resawed some 8/4 curly maple and even with the best of care it turned into propellers. Water, heating blanket, pressure and staring didn't help.
|
