Radial Tonebone PZ-Pre connect with d tar equinox

[ntik]

Hello, I would like to help me, how can I connect the Radial Tonebone PZ-Pre together with d tar equinox?

[mchalebk]

What are you using this gear for? Live performance? Recording? What other gear are you using it with?

Depending on what you want to do, it looks like it could be connected via either the Effects Loop or by running the Radial output to the input of the Equinox, then then the Equinox output to your other gear (recording console, mixer, etc.).

However, I would also have to ask why you want to do this. That Radial preamp looks like it has some pretty good EQ capability built in. Do you really need the Equinox?

[ntik]

Originally Posted by mchalebk

What are you using this gear for? Live performance? Recording? What other gear are you using it with?

Depending on what you want to do, it looks like it could be connected via either the Effects Loop or by running the Radial output to the input of the Equinox, then then the Equinox output to your other gear (recording console, mixer, etc.).

However, I would also have to ask why you want to do this. That Radial preamp looks like it has some pretty good EQ capability built in. Do you really need the Equinox?

for even better results,,,d tar equinox+the Effects Loop radial tonepone?

[mchalebk]

Originally Posted by ntik

for even better results,,,d tar equinox+the Effects Loop radial tonepone?

You can certainly put the Equinox in the effects loop. However, that might not be the best option depending on what you're trying to do. It looks like the effects loop in this pre is designed to switch in effects using the stomp button. Of course, you could leave it active all the time, but I'm not sure that makes sense. It might make more sense to simply put the Equinox between the Radial and the next piece of gear (mixer, amp, whatever).

Also, if you do end up using the Equinox, my recommendation would be to put the EQ controls on the Radial to the neutral position (12 o'clock?) to take them out of the picture. Using multiple levels of EQ is more likely to degrade your sound than improve it.

If you could tell us more about your complete setup and how you want to use this, we could give you more useful advice.

[ntik]

Originally Posted by mchalebk

You can certainly put the Equinox in the effects loop. However, that might not be the best option depending on what you're trying to do. It looks like the effects loop in this pre is designed to switch in effects using the stomp button. Of course, you could leave it active all the time, but I'm not sure that makes sense. It might make more sense to simply put the Equinox between the Radial and the next piece of gear (mixer, amp, whatever).

Also, if you do end up using the Equinox, my recommendation would be to put the EQ controls on the Radial to the neutral position (12 o'clock?) to take them out of the picture. Using multiple levels of EQ is more likely to degrade your sound than improve it.

If you could tell us more about your complete setup and how you want to use this, we could give you more useful advice.

because it equinox , has low signal to the PA

[moga]

I had both but sold Equinox.

I had enough sound from the PZ radial.

I blended K&K & Sunrise and send the signal to Equinox and processed there to PA system.

but since PA system was good enough to eq the sound from PZ radial.. i just skipped the Eqnuinox.
it's a great unit for sure.but not on my playing purpose.

good luck~

[ntik]

Originally Posted by moga

I had both but sold Equinox.

I had enough sound from the PZ radial.

I blended K&K & Sunrise and send the signal to Equinox and processed there to PA system.

but since PA system was good enough to eq the sound from PZ radial.. i just skipped the Eqnuinox.
it's a great unit for sure.but not on my playing purpose.

good luck~

Which one you like best..equinox or radial?

[moga]

Originally Posted by ntik

Which one you like best..equinox or radial?

I liked the Radial ..

As you mentioned, equinox signal was very weak for me since my pickups were passive (K&K , Sunrise).. I send signal through my DI Box (active) to Equinox. then it boost the volume..

[ntik]

Originally Posted by moga

I liked the Radial ..

As you mentioned, equinox signal was very weak for me since my pickups were passive (K&K , Sunrise).. I send signal through my DI Box (active) to Equinox. then it boost the volume..

To connect equinox with one di box for more out signal to PA?

[moga]

Originally Posted by ntik

To connect equinox with one di box for more out signal to PA?

Yeah..~ it doesn't sound efficient .. but it worked for me.~
specially for passive pickup ~..

[ntik]

Originally Posted by moga

Yeah..~ it doesn't sound efficient .. but it worked for me.~
specially for passive pickup ~..

i have equinox,and i am between d tar soltice or radial tonepone pz, which
choice for best connect together with equinox?

[moga]

Originally Posted by ntik

i have equinox,and i am between d tar soltice or radial tonepone pz, which
choice for best connect together with equinox?

what's your pickup combo?

I had Solstice with k&k trinity system. it served great..~

I only chose radial pz because of boost system. and some looping outputs to other pedals..(well, solstice has it too tho)..

[ntik]

Originally Posted by moga

what's your pickup combo?

I had Solstice with k&k trinity system. it served great..~

I only chose radial pz because of boost system. and some looping outputs to other pedals..(well, solstice has it too tho)..

my pickup is fishman classic four and i have aer compact 60, and d tar equinox,but equinox have low out signal,and i want to help the equinox for more out signal,what do you suggest to me

[moga]

Originally Posted by ntik

my pickup is fishman classic four and i have aer compact 60, and d tar equinox,but equinox have low out signal,and i want to help the equinox for more out signal,what do you suggest to me

As i told you i used Active DI (AR133) before Equinox.

[ntik]

Originally Posted by moga

As i told you i used Active DI (AR133) before Equinox.

what now playing,equinox with BSS AR 133?