The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 11-20-2021, 01:48 PM
M Hayden M Hayden is offline
Registered User
 
Join Date: Nov 2007
Location: The Glorious East SF Bay, CA
Posts: 1,054
Default Ovation - repair even possible?

I was recently given an old 1970s Ovation Glen Campbell 12-string.

itís in great condition except for the neck angle, which is well into suspension-bridge territory - itís sort of playable in the first five frets, but beyond that, nsm.

The bracing is in good nick, as is the bridge; nothingís cracked or come loose.

Is it even possible to remove the necks on older Ovations, or is this likely a wall-hanger at this point?

Iíve done some research and it seems like newer Ovations have bolts securing the neck, but I donít see any on this ca-1978 one. If I can sort out how to get the neck off, I might have a chance of fixing it, but thereís very limited information on this neck joint.

The plan is to repair if possible and give it to the local community college music program. If it isnít reasonably possible, not sure what to do with it, except turn it into a wall decoration or something.

Thanks in advance for any thoughts.
Reply With Quote
  #2  
Old 11-20-2021, 02:38 PM
phavriluk phavriluk is offline
Registered User
 
Join Date: Jul 2012
Location: Granby, CT
Posts: 1,786
Default a thought

Is there an Ovation forum to which OP can pose his question?
Reply With Quote
  #3  
Old 11-20-2021, 06:26 PM
FLRon FLRon is online now
Registered User
 
Join Date: Apr 2017
Location: SW Florida
Posts: 817
Default

Ovationfanclub.com is a good place to start.
__________________
It wonít always be like this.
Reply With Quote
  #4  
Old 11-20-2021, 06:50 PM
mirwa mirwa is offline
Registered User
 
Join Date: Sep 2013
Posts: 2,999
Default

Yes you can remove the necks on ovations, typically they are epoxied on.

Does the rosette buckle under string tension, that is the most common problem I see, the top deforms under tension and a pronounced wrinkle exists in the rosette material

Steve
__________________
Cole Clark Fat Lady
Gretsch Electromatic
Martin CEO7
Maton Messiah
Taylor 814CE
Reply With Quote
  #5  
Old 11-20-2021, 10:03 PM
merlin666 merlin666 is offline
Registered User
 
Join Date: May 2013
Location: Canada Prairies
Posts: 2,957
Default

Quote:
Originally Posted by phavriluk View Post
Is there an Ovation forum to which OP can pose his question?
Yes they have a bottom feeding luthier section where they discuss amazing repairs.
Reply With Quote
  #6  
Old 11-21-2021, 12:00 AM
6L6 6L6 is offline
Registered User
 
Join Date: May 2011
Location: San Francisco, CA
Posts: 4,904
Default

Back in the early 2000ís, Frank Ford and his team at Gryphon did a neck reset on my Ovation 1869 Custom Legend. Very tough job and expensive, but it turned out great.
Reply With Quote
  #7  
Old 11-22-2021, 10:07 AM
tadol tadol is offline
Charter Member
 
Join Date: Aug 2008
Location: Berkeley, CA
Posts: 4,781
Default

Maybe yank the frets and plane the fretboard down? How much do you think youíd need to remove to make it good for another 10 years?
__________________
More than a few Santa Cruzís, a few Sexauers, a Patterson, a Larrivee, a Cumpiano, and a Klepper!!
Reply With Quote
  #8  
Old 11-22-2021, 01:07 PM
Zigeuner Zigeuner is offline
Registered User
 
Join Date: Jan 2010
Location: Northern California
Posts: 1,110
Default

Ovations are devilishly difficult to work on. When I had my shop, an Ovation came in with part of the bridge missing. I had thought that surely they wouldn't use epoxy to fasten the bridge. LOL.

No such luck. I had to plane the bridge off down to the top to remove it. I made a new bridge and reglued with hot hide glue. I was sure sorry that I took that job.

I can't imagine trying to remove the neck from one if it were epoxied on. That would be a thankless job and the cost at a luthier shop should exceed the value of the instrument.

There's no such thing as vintage epoxy.
Reply With Quote
  #9  
Old 11-26-2021, 04:11 PM
Tony Burns Tony Burns is offline
Registered User
 
Join Date: Mar 2006
Location: middle of no where
Posts: 7,725
Default

some are easy, some are not -have heard of one guy who just janked it and it came off -It wouldnt hurt hurt to ask a luthier
__________________
---------------------------------
Wood things with Strings !
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Tags
ovation, repair

Thread Tools





All times are GMT -6. The time now is 09:33 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2022, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=