![]() |
#1
|
|||
|
|||
![]()
I’m frustrated and tired. Wanting to do livestream to Facebook or StreamYard to Facebook....but know I’m missing something here.
I have IRig Stream (just purchased) JBL EON ONE PA system Boss VE-8 guitar/vocal processor iPhone XR Several dynamic microphones So hooked up everything ran into EON ONE, with the RCA’s from the IRig Stream to the RCA’s monitor out on Eon One. Continuous noise on replaying anything I attempt to record. I’m pretty sure that I need some other interface...connection. Watching all the YouTube videos on these don’t actually show connection options. The only thing I see constant is the use of the “master output” on a DJ rig which I don’t think I need. Do I need a small mixer?? Am I hopelessly doomed here? I also have a IRig pre which worked well if I was just vocal, but want guitar and vocals together.. Any help or direction is appreciated.... Thank you
__________________
Michael Ward 2021 Taylor 150e 2022 Gibson J45 standard 2016 Martin DR Centennial 2019 Epiphone PR5 2019 Taylor 414CE Fishman Loudbox Artist Boss VE-8 LR Baggs Voiceprint DI Boss Mic Mechanic 2 & Harmony Singer 2 JBL Eon One Redeye pre amp |
#2
|
||||
|
||||
![]()
So your signal right now is your mic and guitar to the VE-8, VE-8 to the EON and then you connected the EON's RCA L/R jack out to the stream and then the stream to the iPhone?
That sounds right but I don't have the EON or the iRig Stream. I have the iRig Pro. You're sure you're on the EON's RCA out and not in? (I can see in photos that there looks like both.) Are you getting the OK green light on the front of the iStream for Signal? How are you testing within Facebook live on your phone? I run into my Mac and I have to deliberately select the iRig Pro when I go into Live mode. It doesn't do it automatically. On the Mac there is options for selecting your input device in Facebook Live. Once connected to the iRig Pro that automatically pops up as a choice in the options. Unfortunately, I don't use an iPhone. |
#3
|
|||
|
|||
![]()
Ah Methos, there’s the rub.
There is only one “out” that I can find on the EON ONE and that is the “monitor out”. That is the one I used. As far as signal to the IRig Stream, the light (blue) comes on but no matter what gain or volumes are changed, there is no change in any setting. I get virtually no volume, but do get constant hiss like hum when played back. I have a Mac but it’s early 2013. I probably no less about that than I do the iPhone. Thought about all that OBS stuff but sounds prickly! I really don’t want to purchase anything else extra, but am willing if another item is needed. Appreciate your input Thank you Michael
__________________
Michael Ward 2021 Taylor 150e 2022 Gibson J45 standard 2016 Martin DR Centennial 2019 Epiphone PR5 2019 Taylor 414CE Fishman Loudbox Artist Boss VE-8 LR Baggs Voiceprint DI Boss Mic Mechanic 2 & Harmony Singer 2 JBL Eon One Redeye pre amp |
#4
|
||||
|
||||
![]()
So turning the dial up on the iRig Stream doesn't turn the light green? Can you take a photo of the back of the EON? The one I looked at online looked like it had two sets of RCA jacks. Which model do you have?
|
#5
|
|||
|
|||
![]()
Nothing changes as far as levels or lights, just solid.
I have an EON ONE, not a Pro. No luck sending photo from my iPad, but here is manual https://dk.jbl.com/on/demandware.sta...0(English).pdf IRig Stream RCA plugged into JBL EON ONE monitor outs. Thank you Michael
__________________
Michael Ward 2021 Taylor 150e 2022 Gibson J45 standard 2016 Martin DR Centennial 2019 Epiphone PR5 2019 Taylor 414CE Fishman Loudbox Artist Boss VE-8 LR Baggs Voiceprint DI Boss Mic Mechanic 2 & Harmony Singer 2 JBL Eon One Redeye pre amp |
#6
|
||||
|
||||
![]()
Sending you a PM...
|
![]() |
|
Tags |
facebook, irig stream, livestream |
Thread Tools | |
|