The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Reply
 
Thread Tools
  #1  
Old 06-01-2015, 12:03 PM
Neil K Walk Neil K Walk is offline
Registered User
 
Join Date: Aug 2006
Location: SWPA
Posts: 6,094
Default Idle question for you professional luthiers

I've often detected admiration between some of you and have seen firsthand a generosity in the luthier community but I often wonder, do these relationships ever bloom into collaborations?

I'm not talking about farming out inlay but two or more shops doing fabrication and setup where one of you will do the soundboard or the entire body and the other does the neck or any other combination of tasks?

The only example I can think of is Todd's Acoustic Voice guitar that nearly didn't happen because one or two of the contributing luthiers had a hard time coordinating or fitting it into their schedules and in the end some took more on to their plate than was originally agreed upon. Is this is the exception rather than the rule or it mostly one shop does all the structural stuff and subcontracts the decorative inlay?
__________________
~ Neil

2013 OLF MJ (DIY build, western red cedar, Honduran mahogany)
2012 McKnight McUkulele
2009 Martin D-16GT
2006 Larrivee OM-03R
1998 Fender American Standard Stratocaster (Natural ash)
Reply With Quote
  #2  
Old 06-01-2015, 12:37 PM
Tim McKnight's Avatar
Tim McKnight Tim McKnight is offline
AGF Sponsor
 
Join Date: Oct 2005
Location: Morral, Ohio
Posts: 5,208
Default

Paul Woolson and I collaborated on one guitar build but the logistics were difficult and costly shipping it back and forth. It was a fun project but not something we would likely ever do again.
__________________
tim...
www.mcknightguitars.com
Reply With Quote
  #3  
Old 06-01-2015, 03:01 PM
Rodger Knox's Avatar
Rodger Knox Rodger Knox is offline
Charter Member
 
Join Date: Jul 2013
Location: Baltimore, Md.
Posts: 2,406
Default

The MIMF has collaborated on a couple of instruments.
http://www.mimf.com/bass2012/bass2011.htm
__________________
Rodger Knox, PE
'56 Gibson J-50
et al
Reply With Quote
  #4  
Old 06-01-2015, 04:49 PM
SJ VanSandt SJ VanSandt is offline
Registered User
 
Join Date: Feb 2013
Location: Austin, Texas
Posts: 1,842
Default

I remember seeing an article in Acoustic Guitar Magazine about a guitar made by a number of luthiers in Maine. It was a cool looking guitar but I think the luthiers agreed that it was unlikely they would do it again. Probably 10 or 12 years ago.
__________________
Allison AJ, Kinnaird OM
Reply With Quote
  #5  
Old 06-01-2015, 06:25 PM
nacluth's Avatar
nacluth nacluth is offline
AGF Sponsor
 
Join Date: Mar 2010
Posts: 2,041
Default

Steve and John Kinnaird have built two collaborative guitars. Both were quite successful. Now being brothers, it helps, but their shops were more than a thousand miles apart. Different parts were done by each on the two guitars. The The real trouble for doing more partnership guitars is trying to find the time in the busy build schedule.

Btw I got to play the McKnight/Woolson guitar at acousticpromusician. It was a cannon of a little guitar.
__________________
Ryan
Kinnaird SJ - Walnut/Sitka

Kinnaird Guitars - from the oldest town in Texas

***2019 Stephen Kinnaird Post-Show Sale***
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Custom Shop

Thread Tools



All times are GMT -6. The time now is 12:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2000 - 2018, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=