|
View Poll Results: Which is your favorite top wood? (multiple answers allowed) | |||
Sitka Spruce | 55 | 44.35% | |
Adirondack Spruce | 30 | 24.19% | |
White/Englemann/"European" Spruce | 29 | 23.39% | |
Lutz Spruce | 9 | 7.26% | |
Cedar | 19 | 15.32% | |
Redwood | 9 | 7.26% | |
Mahogany | 9 | 7.26% | |
Koa | 5 | 4.03% | |
Other - please specify in forum below | 7 | 5.65% | |
Multiple Choice Poll. Voters: 124. You may not vote on this poll |
|
Thread Tools |
#16
|
|||
|
|||
Sitka Spruce suits my playing style, but I like the others as well.
__________________
Nothing bothers me unless I let it. Martin D18 Gibson J45 Gibson J15 Fender Copperburst Telecaster Squier CV 50 Stratocaster Squier CV 50 Telecaster |
#17
|
|||
|
|||
I like German/Euro spruce, and I like the Sitka tops that I have played (but I have read that Sitka is of greater variability in terms of stiffness, so it is a bit less predictable in terms of sound).
As others have noted, I may be thinking that what I like is the sound of the top, when actually I like the sound of particular guitars , and mistakenly assign the tone to the top, rather than the handiwork of the builder, or some other aspect of the guitars that I like. I believe that I don’t like Adirondack tops...but most of that belief is rooted in playing Adirondack tops that are less than 10 years old, which may be missing the sweet spot of Adirondack in terms of age. |
#18
|
|||
|
|||
Any of the spruce varieties. (Can't tell them apart).
|
#19
|
|||
|
|||
Which soundboard wood is my favorite depends on the type of wood used for the back and sides.
For example, if the back and sides are mahogany, I prefer cedar. For Brazilian rosewood, I’d specify Engelmann spruce. |
#20
|
|||
|
|||
I REALLY love the sound of Port Orford cedar! I haven't had enough experience with it to know how it would "stand up" to vigorous strumming or attack strength, however...
At this point in time, I have the two acoustic guitars I plan on playing "for the duration", and each of them has German spruce for the top, with a variety of rosewood for the back and sides... my Mark Angus #58 12 string has Black Forest German spruce for the top, while my Goodall CJC has German spruce... Seems interesting that after well over 50 years of playing and performing with acoustic guitars, that I've come "full circle" to having two rosewood/German spruce guitars...
__________________
"He's one of those who knows that life is just a leap of faith. Spread your arms and hold your breath, always trust your cape..." "The Cape" (Guy Clark/Jim Janowsky/Susanna Clark) |
#21
|
||||
|
||||
I own guitars with cedar, sitka spruce, adi, redwood, and mahogany tops. I voted mahogany but honestly they all have their place and I really have a hard time saying one is definitely better than another.
|
#22
|
|||
|
|||
As a builder, if I could only build with one, it would be Engelmann. The reason is Engelmann is all over the map - some of it is light weight and paper white like the best German (Euro) spruce and some is dense and stiff and stripey and can give red a run for it's money.
I build a number of different types of instruments and select accordingly. I've used a number of different woods for soundboards but spruce is hard to beat. |
#23
|
||||
|
||||
Butcher block,,,, very durable
__________________
Enjoy the Journey.... Kev... KevWind at Soundcloud KevWind at YouYube https://www.youtube.com/playlist?lis...EZxkPKyieOTgRD System : Studio system Avid Carbon interface , PT Ultimate 2023.12 -Mid 2020 iMac 27" 3.8GHz 8-core i7 10th Gen ,, Ventura 13.2.1 Mobile MBP M1 Pro , PT Ultimate 2023.12 Ventura 12.2.1 |
#24
|
|||
|
|||
Which wood
I've had the good fortune of owning some different tops but usually by different makers or models. I would say that sitka in general has been the safest bet for me. It's open, has transparency, and neither too bright or too dark. Just the right amount of sensitivity for fingerstyle or strumming. That being said, I appreciate the euro spruces and the cedars on various guitars. My biggest question mark has been Adirondack. I keep on trying it but have found so far that it does not lend itself as well to fingerstyle.
|
#25
|
||||
|
||||
Quote:
To add to the Engelmann versus European debate, I have a custom-built guitar where I described the sound and playing style that I wanted to the builder and she said she could achieve it with Italian (what I suggested initially) or Engelmann. I let her choose, as she knows her woods way better than me, as well as what she had available and how she could sand, brace and otherwise voice it. I now have an Engelmann-topped guitar that sounds incredible. Col |
#26
|
|||
|
|||
Alpine spruce.
|
#27
|
|||
|
|||
Adirondack. Martin used Adi tops until about 1945, when it became unavailable, and the pre-WWII era Martins are the most coveted.
|
#28
|
|||
|
|||
I've owned a few unknown guitars
And I'm not versed enough to tell A sitka from a red or lutz top from sight. I do know my current guitar is Adi over madi and I love red spruce. I played a taylor 712ce 12 fret that I should have bought. It was lutz and I liked it alot. I guess I like stiffer Tops for their volume and headroom. |
#29
|
||||
|
||||
There was a time when I would not give any thought to what type of wood a guitar was made with. If it sounded good and I had the funds I would buy it. After 40 plus years of buying and selling guitars, and over a decade of browsing the AGF, I have realized that an Adi top guitar is what I prefer. From my experience there is a snap and clarity to it that is perfect for me.
__________________
David Webber Round-Body Furch D32-LM MJ Franks Lagacy OM Rainsong H-WS1000N2T Stonebridge OM33-SR DB Stonebridge D22-SRA Tacoma Papoose Voyage Air VAD-2 1980 Fender Strat A few Partscaster Strats MIC 60s Classic Vib Strat |
#30
|
|||
|
|||
Spruce tops are my favorite top wood, followed by western red cedar.
Quite honestly, I haven’t found the supposed characteristics of the different species of spruce to be even remotely as cut and dried as some believe them to be. There’s an enormous amount of overlap between them. What’s more, all of the spruces can and often do mimic all of the other spruces, in both appearance and musical qualities. So while some folks put a lot of emphasis on those differences, in my experience it’s just easiest to take each instrument as an individual. Most of my spruce-topped guitars, mandolins and mountain dulcimers have Sitka spruce tops. But I also have a couple of guitars with red “Adirondack” spruce tops, a couple with European spruce tops, and one with an Engelmann spruce top. All of them sound good, which is all that I care about. The fact is that I can hear more significant differences between the woods used for backs and sides than I can in the different species of spruce. I’m not denying that some differences exist, but in my experience they’re much less of a factor in terms of tone, balance and response than what the tonewoods used for backs and sides bring to the table. Hope that makes sense. Wade Hampton Miller |
|
Tags |
cedar, koa, mahogany, spruce, top wood |
Thread Tools | |
|