#1
|
|||
|
|||
Emerald X7 Nylon plus schatten low output gain
I just removed the factory lr baggs element vtc and replaced with a schatten HFN artist plus 2.
Overall I like the tone both plugged and unplugged better. However I had to crank the gain all the way up on the pre amp and am still running at levels that are lower than my Yamaha slg200n nylon or the vtc install in my Breedlove, both of which are still at factory default gain. I used the putty install as I was hoping to brighten the sound a bit and shifted the pickup around backwards forwards and side to side under the bridge. I could change the string balance and tone but not make much difference to overall level / gain. Any ideas from others who have worked with the combination of Emerald and Schatten? Did you need to crank the pre amp gain on your Emerald installs for Schatten? |
#2
|
|||
|
|||
Have you adjusted the gain POT inside the endjack preamp? Others have posted that Shatten ships the various active HFN options with that POT set at 20% and they had to turn it to 100%.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#3
|
|||
|
|||
Yes, to get a decent output volume from my Schatten Artists Plus 2, I had to turn the Trim Pot on Channel 1 to 100%. Yesterday, for the first time, I plugged my Martin D-18/Schatten Artist Plus 2 combo into my Line 6 L2t and found that the Gain Light on the L2t lit much more readily than on my LR Baggs Synapse. This would seem to indicate that the L2t's input is more sensitive than that of the Synapse. I'll have to redo the D-18/Schatten combo through the Synapse to see if the Artist Plus 2 is now outputting higher than when I installed it over a month ago. I wonder if the 3M VHB adhesive has hardened since its installation and is now transferring vibration more efficiently? We can sure hope so! More to come ...
__________________
Martin HD-28 Sunburst/Trance M-VT Phantom Martin D-18/UltraTonic Adamas I 2087GT-8 Ovation Custom Legend LX Guild F-212XL STD Huss & Dalton TD-R Taylor 717e Taylor 618e Taylor 614ce Larrivee D-50M/HiFi Larrivee D-40R Blue Grass Special/HiFi Larrivee D-40R Sunburst Larrivee C-03R TE/Trance M-VT Phantom RainSong BI-DR1000N2 Emerald X20 Yamaha FGX5 Republic Duolian/Schatten NR-2 |
#4
|
|||
|
|||
Yes I set the pot to full 100%. At factory settings I couldn't even hear any output over the acoustic output from the guitar itself. My question was to first check to see if this what other emerald / schatten installs are experiencing or if I had further install issues.
And then whether there were other ideas to improve gain. It's workable now but definitely seems a little more vulnerable to feedback than the lr baggs system it replaced with the gain cranked like that and the levels are coming in low off some of my di for recording. Last edited by Aspiring; 05-13-2019 at 05:18 PM. |
#5
|
|||
|
|||
I also bought the plus 2 with the thought of adding an additional source into the mix for more options either a mic or soundboard pickup so maybe that's the next step to get more signal.
|
#6
|
|||
|
|||
Quote:
The preamp has plenty of output. The HFN itself has a low output but nothing to worry about. It is hotter than the Anthem. It may not be what you're used to though but I wouldn't let that bother you. I'm loving the preamp but had an issue with the Emerald soundboard prep and right now I'm waiting on the UST to show up before I carry on with the experimenting. |