#1
|
|||
|
|||
HPL instead of carbon fiber?
Out of curiosity, has anyone considered to buy a Martin all HPL guitar instead of a carbon fiber one?
Possible advantages: 1) prices range between $600 and $700. 2) no need to keep it in the case, no need for humidification (like a carbon fiber guitar) 3) possibly, a sound more similar to a wood guitar. What is your opinion? Last edited by gerardo1000; 01-07-2019 at 11:53 AM. |
#2
|
|||
|
|||
I had a Martin 000 full HPL a few years ago. Nothing spectacular but not a bad guitar either.
Have you seen this video? Quite fun to check if our ears agree with our eyes https://m.youtube.com/watch?v=UlZveUnb5hY |
#3
|
|||
|
|||
Tof;
This was interesting and I got an A. Also interesting is the possibility that the favorite sound would vary by listener. This same test would be interesting if done with a variety of wood/HPL/CF instruments. |
#4
|
|||
|
|||
I would imagine that in many ways they are comparable in terms of resistance to climate-induced variation, but would also imagine that HPL would be rather heavier than a comparable CF guitar.
|
#5
|
|||
|
|||
I ve never heard of the need for humidification for a CF guitar. What would it accomplish?
__________________
Dickey Clapton |
#6
|
||||
|
||||
If Gerardo had said "no need to keep it in the case, no need for humidification (just like a carbon fiber guitar)" it might have been a little clearer
__________________
Martin 0-16NY Emerald Amicus Emerald X20 Cordoba Stage Some of my tunes: https://youtube.com/user/eatswodo |
#7
|
||||
|
||||
Quote:
I have a Martin LX-1 - HPL back and sides, solid spruce top and the stratabond neck. It has a sweet voice, but is just not comfortable for me to play. Nothing to do with its construction, just its geometry,
__________________
Martin 0-16NY Emerald Amicus Emerald X20 Cordoba Stage Some of my tunes: https://youtube.com/user/eatswodo |
#8
|
|||
|
|||
The main advantage is price. Also keep in mind that while the body and top might be HPL and therefore pretty impervious to humidity changes, the braces are still wood, and the neck is usually very stable (and heavy) Stratabond laminate. I have played a number of 000 and D sized Martin HPL guitars (my wife owns a LM in pink) and they aren't bad - probably better than most all-laminate imports. But they are not that impressive either, except when considering the price versus CF.....
Out of hundreds, I have only ever played one or two carbon fiber guitars that were outright bad. These were two early thin-bodied Rainsong's that were heavily gooped up with thick metal flake paint (silver and candy apple red). They may have been fine plugged in, but acoustically they were complete duds. They sat in that store for several years. |
#9
|
|||
|
|||
When I first considered a carbon fiber guitar, we were on an island in the Pacific Northwest. I called the closest Guitar Center and asked about RainSongs... they had never heard of them. I explained the carbon fiber construction, the guy on the phone asked what that looked like. When I mentioned "it's black," he said, "We have an HPL Martin here that is all black..." He went on to tell me it is like "pressed wood with black vinyl on the outside."
Um, not even close! He then said, "Or if you want it to look like wood, these can be had with kind of a picture of wood on the outside." I'll pass. I got my first CF guitar (not from them) right after that. For full disclosure, I have nothing against Martin's HPL guitars, just not what I want. I still have a GSmini (laminate back and sides). I am not a CF snob. |
#10
|
|||
|
|||
If you shock a Martin HPL guitar by dropping it in its case for example, they do have a tendency to fracture at the kurfing leaving the sides disconnected from the top or bottom or both. I've seen several in for this repair at a friend's shop.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#11
|
|||
|
|||
My understanding was that this tendency to fracture is limited to models that have HPL body and solid spruce top, not to models that are all HPL ?
|
#12
|
|||
|
|||
The ones I saw were bottom of the line all HPL. I imagine it's not common but not in the same league as CF for robustness none the less.
__________________
jf45ir Free DIY Acoustic Guitar IR Generator .wav file, 30 seconds, pickup left, mic right, open position strumming best...send to direct email below I'll send you 100/0, 75/25, 50/50 & 0/100 IR/Bypass IRs IR Demo, read the description too: https://youtu.be/SELEE4yugjE My duo's website and my email... [email protected] Jon Fields |
#13
|
|||
|
|||
HPL is just not as resonate as carbon fiber, which is a pretty big detraction. Carbon fiber has the strength AND resonance, which is why it's beloved among the believers. If it was JUST about climate conditions, maybe you'd have a point. HPL can make pretty good guitars at their price point, but if you ignore price, then carbon fiber is just a superior-sounding instrument.
|
#14
|
|||
|
|||
Carbon fiber has the good resonant properties of a decent piece of wood, but with a different mix of strength, stiffness and internal damping. HPL has the resonant properties of a piece of plywood - not much.
|
#15
|
|||
|
|||
Some plywoods are better than others and some pretty high-line guitars have plywood backs and sides. Some guitars are totally plywood and they manage to sound all right. Even Masonite and plastic guitars can be OK. But all those guitars fail to compete with the durability, shaping, and advancements of CF instruments.
|