The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Archtops

Reply
 
Thread Tools
  #1  
Old 02-22-2019, 08:11 PM
BoneDigger's Avatar
BoneDigger BoneDigger is offline
Charter Member
 
Join Date: Jun 2012
Location: Tyler, TX
Posts: 5,833
Default Epiphone Masterbilt Century Deluxe upgrade

I still really like my Century Deluxe but decided I just couldn't live with the pickup that came on it. I considered a floating pickup but decided to go all out on it. I had my local shop install a Gretsch Dynasonic neck pickup in it. Wow, what a difference! They installed tone and volume controls and replaced the battery compartment with a nice cover and jack. For rockabilly and even jazz or blues, this is a great little combo!

Todd20190222_165505.jpg20190222_165517.jpg
Reply With Quote
  #2  
Old 02-22-2019, 08:44 PM
Steve DeRosa Steve DeRosa is offline
Registered User
 
Join Date: Mar 2013
Location: Staten Island, NY
Posts: 10,457
Default

Um, it's a bit too late now, but did you consider this Big Band period-accurate - and non-invasive - option:

https://shop.guildguitars.com/produc...-mount-pickup/

IMO Epiphone should have done something like this from the get-go - I also think a piezo bridge is a bad idea on a guitar of this type - and I'm hoping they get it right on the long-rumored/long-awaited successor lineup...
__________________
"I've never wished a man dead, but I have read some obituaries with great pleasure."
- Mark Twain
Reply With Quote
  #3  
Old 02-22-2019, 09:29 PM
BoneDigger's Avatar
BoneDigger BoneDigger is offline
Charter Member
 
Join Date: Jun 2012
Location: Tyler, TX
Posts: 5,833
Default

Quote:
Originally Posted by Steve DeRosa View Post
Um, it's a bit too late now, but did you consider this Big Band period-accurate - and non-invasive - option:

https://shop.guildguitars.com/produc...-mount-pickup/

IMO Epiphone should have done something like this from the get-go - I also think a piezo bridge is a bad idea on a guitar of this type - and I'm hoping they get it right on the long-rumored/long-awaited successor lineup...
Yep, I sure did. I almost pulled the trigger on one of those but decided I felt like going all out on this. I very happy with the tone. It's a great mod and not too awfully expensive when finished.

Last edited by BoneDigger; 04-08-2019 at 12:34 PM.
Reply With Quote
  #4  
Old 04-08-2019, 12:34 PM
rockabilly69 rockabilly69 is offline
Registered User
 
Join Date: Jan 2010
Location: Ogden, Utah
Posts: 2,398
Default

Quote:
Originally Posted by BoneDigger View Post
Yep, I sure did. I almost pulled the trigger on one of those but decided I felt like going all out on this. I very happy with the tone. It's a great mode and not too awfully expensive when finished.
For me I would have to go full dynasonic, just for the pole piece adjustment alone!!! And I've owned a few DeArmond stick pickups I really don't like all that stuff on top of my guitar!
Reply With Quote
  #5  
Old 10-31-2019, 06:08 PM
JohnHuff JohnHuff is offline
Registered User
 
Join Date: Dec 2015
Location: Wales, UK
Posts: 4
Default Shadow Nanoflex pickup

I was disappointed with the brittle sound of the original pickup, also the 1st string was too quiet. I had the p/u replaced with a Shadow Nanoflex and the difference is AMAZING! It gives the true acoustic sound of the guitar (not the elecric sound which will inevitably come from a conventional p/u no matter how good). Equipped with Martin Retro Monel strings all the brashness has gone and the guitar is sweet and even in response right through the range. The only downside is that the onboard controls, which were themselves a bit iffy, are now defunct. I use my amp's eq (AER Compact 60) and a volume pedal for live situations. I now have the guitar I wanted. Shame it was spoilt by cheap electronics in the first place.
Reply With Quote
  #6  
Old 11-01-2019, 11:04 AM
rockabilly69 rockabilly69 is offline
Registered User
 
Join Date: Jan 2010
Location: Ogden, Utah
Posts: 2,398
Default

Quote:
Originally Posted by JohnHuff View Post
I was disappointed with the brittle sound of the original pickup, also the 1st string was too quiet. I had the p/u replaced with a Shadow Nanoflex and the difference is AMAZING! It gives the true acoustic sound of the guitar (not the elecric sound which will inevitably come from a conventional p/u no matter how good). Equipped with Martin Retro Monel strings all the brashness has gone and the guitar is sweet and even in response right through the range. The only downside is that the onboard controls, which were themselves a bit iffy, are now defunct. I use my amp's eq (AER Compact 60) and a volume pedal for live situations. I now have the guitar I wanted. Shame it was spoilt by cheap electronics in the first place.
the original pickup is a shadow nanoflex, as per Epiphone....


Now with the eSonic™ HD preamp and Shadow NanoFlex™ HD Under-saddle pickup, you can plug in any Masterbilt Century archtop acoustic/electric into an amp or any PA and hear your guitar’s beautiful and dynamic true acoustic tone on any size stage. For flattop guitarists who have only played old plywood archtops, the sound of a Masterbilt Century guitars will be a revelation. Get ready for a totally new acoustic guitar experience!
Reply With Quote
  #7  
Old 11-01-2019, 02:27 PM
JohnHuff JohnHuff is offline
Registered User
 
Join Date: Dec 2015
Location: Wales, UK
Posts: 4
Default Shadow Nanoflex pickup

Unfortunately it seems that Epiphone may have fitted a cheaper Nanoflex-ish pickup. Beilieve me, it doesn't seem to be a proper one. (I'm choosing my words carefully.) It's obvious when it's removed. The difference is like night and day. Instead of picking up the sound of the strings, the replacement (real one) picks up the sound of the guitar top, rich and full. The monel strings reduce the top end. The bronze/nickel alloy is not as bright as phosphor/bronze.
I had mine fitted by Jeff Beer (Zero One Guitars), a luthier from Pencader, Wales. He made a superb job of it. The volume pot was unreliable, causing distortion, and so as it could not be removed it was left out of the wiring. He fitted the preamp in the original jack socket and the battery in the original battery box. I use a volume pedal for real time volume changes but the amp controls for overall volume setting.
The guitar now punches way above its weight. It's a fantastic instrument, superb value. But it will only be the cogniscenti (those that know) who get the best out of this guitar. It really comes in under the radar. The cheap electronics will always sully its reputation, but invest in one, make the changes and you'll have a jewel!
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Archtops

Thread Tools





All times are GMT -6. The time now is 07:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Copyright ©2000 - 2020, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=