#1
|
|||
|
|||
K and K Pure Mini Installation w/ Pics
hello all,
I finally got around to installing my k and k pure mini and I thought you might like to see some pics I took.this went in my OM-15 that I bought from Ted here on the forum. pics with just an iphone through the endpin hole. plugged into my fishman loudbox mini it just sounds better than I expected, natural sounding, no feedback and if you have the time a worthwhile endeavor instead of fighting the Christmas crowds
__________________
The young man knows the rules, but the old man knows the exceptions. ~Oliver Wendell Holmes Sr. "We all go Do, Re, Mi, but you've gotta find all the other notes yourself." ― Louis Armstrong |
#2
|
|||
|
|||
lovely pictures! Enjoy
__________________
Larrivée OM-03R I bet yours doesnt sound half as good as mine does! |
#3
|
||||
|
||||
Love the "through the endpin" view. Great job!
|
#4
|
|||
|
|||
Nice shots. Thanks for sending me on the guilt trip !
I have had mine, still sitting in it's box, for a couple of weeks now.... I am a little wary of drilling out the end pin hole on my shiny Martin dread ! I may just take it to a good guy I know, for that part of the job. Alternatively, I may put this one in my GS Mini (already got a big enough hole). Then buy another one, sometime soon, for the big M. |
#5
|
|||
|
|||
-Nice work! How does Pure Mini sound compared to a Fishman Active Acoustic Matrix? I installed one of those in my guitar years ago when I was gigging. It sounds pretty good, but lacks a volume or tone control. Of course I could have picked up their VTB control to add to it, but I didn't at the time. I also love the end pin shot!
L8R, Matt |
#6
|
|||
|
|||
How did you drill out the endpin hole without chipping the wood on the outside?
__________________
Warren My website: http://draudio56.wix.com/warren-bendler "It's hard...calming the Beatle inside of me." |
#7
|
|||
|
|||
Quote:
and it makes a very neat hole
__________________
The young man knows the rules, but the old man knows the exceptions. ~Oliver Wendell Holmes Sr. "We all go Do, Re, Mi, but you've gotta find all the other notes yourself." ― Louis Armstrong |
#8
|
|||
|
|||
I've been thinking of the same pickup/amp combo for my own OM15, and with Christmas coming…..
How do you like the results? Does it change the tone...or is it same as unplugged, just louder? Do you use a preamp? How well does a strap hold on to the jack? |
#9
|
|||
|
|||
Very nice!
What size are the individual transducer discs on the pure mini? I can't seem to find this info on the K&K site and they haven't gotten back to my email.... |
#10
|
|||
|
|||
k and k
they are about 7/16 of an inch in diameter (.437)
__________________
The young man knows the rules, but the old man knows the exceptions. ~Oliver Wendell Holmes Sr. "We all go Do, Re, Mi, but you've gotta find all the other notes yourself." ― Louis Armstrong |
#11
|
|||
|
|||
I like it a lot it sounds like the tone of the om-15. I do have a k and k pure preamp that has bass, midrange and treble with a volume control that I am still fooling with. no strap I always play sitting down
__________________
The young man knows the rules, but the old man knows the exceptions. ~Oliver Wendell Holmes Sr. "We all go Do, Re, Mi, but you've gotta find all the other notes yourself." ― Louis Armstrong |
#12
|
|||
|
|||
Quote:
preamp with bass, mid and treble with volume control
__________________
The young man knows the rules, but the old man knows the exceptions. ~Oliver Wendell Holmes Sr. "We all go Do, Re, Mi, but you've gotta find all the other notes yourself." ― Louis Armstrong |
#13
|
|||
|
|||
Quote:
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1 No chipping. I have used it on 5 guitars, no issues. A reg drill bit will ruin your guitar more often than not. Len
__________________
www.seniortechandtravel.com Guild D-55 Guild F-30R Guild M-120 Guild D-125 Epiphone Masterbilt EF-500R Epiphone J-200 Eastman E10OM Eastman AC522 Eastman E20OOSS Yamaha 1972 FG-180 Red Label Taiwan Yamaha LJ6 Yamaha LS6 Koa Pili Koko Concert Uke Koa Pili Koko Tenor Uke Mainland Tenor Uke Various Electrics |
#14
|
|||
|
|||
Quote:
allparts.com: EP-4605-010 Chrome Acoustic End Pin Jack Quote:
I agree with ld27, the step/uni-bit is your best option and it cuts a perfect hole without lifting the finish. This is definitely DIY-able, try drilling a scrap piece first to get a feel for how the uni-bit moves. Here's a couple of points to help: - Cover the area with masking or painters tape and mark off the drill target with a marker or pen - Use an awl or sharp point to pierce through the finish first and make a good dimple (if you have pilot-point drill bits, this works well too, use a 3/32" bit) - Drill a pilot hole the size of the first step of the uni-bit (usually 1/8") to get started - Try to keep the drill as perpendicular as possible and widen the hole to 1/2" Finish lifting usually happens when the drill bit is moved off square, but the uni-bit cuts so nicely that it helps to prevent it. Hope this helps, I've been on your side of this question before. ... Joe |
#15
|
|||
|
|||
Thanks!
Now I have to figure out what that is in metric So hopefully it's safe to assume that the 2 x 1/2 inch discs on the Twin Spot are going to have an output roughly similar to the 3 x 7/16 inch discs on the Pure Mini????? |