#1
|
||||
|
||||
Changing Tuners on a Carbon Fiber
Has anyone worked on a carbon fiber guitar? I want to swap out the stock tuners for GOTOH Delta 510s. I'll have to drill a small pilot hole for the attachment screw. I've had lot's of experience with wood, but I've never worked with CF.
STeve
__________________
Visit me at: http://gitrboy.blogspot.com/ http://www.youtube.com/user/Nekias1/videos |
#2
|
|||
|
|||
I have drilled new holes in a couple for separate 1/4 in plugs with no problem I put tape over I am drilling first...might be different in Canada eh
__________________
YUP.... Emerald: X-20, Center hole X-10 (Maple) and X-7 (redwood), Spalted Chen Chen X 10 level 3, CA: Early OX and Cargo McPherson: Early Kevin Michael Proto Some wood things by Epi, Harmony, Takamine, Good Time, PRS, Slick, Gypsy Music, keyboards, wind controllers.. etc |
#3
|
|||
|
|||
Should be some that drop right in place of the old ones. Just get model with screws at 6:00. Something like this might work: http://www.japarts.ca/Gotoh/Gotoh-Pr...510.asp#SGV510
I'd run it by RS to be sure though. |
#4
|
||||
|
||||
Quote:
Gotoh 510Zs are drop-on for RainSong, no modifications required at all. See my threads at: http://www.acousticguitarforum.com/f...d.php?t=242692 http://macnichol.com/forum-post/4950
__________________
Ken Emerald Balor 5 string, Taylor GS-Mini Bass, RainSong SGA-FLE, WS1000 Classic N1 and WS3000 N1, Republic Resolian Style 804, Royall Teardrop Tenor Reso A few electrics, a bunch of basses Wandering the continent - CA > IL > NH > TX (for good, hopefully) |