Grand Auditorium Taylor 12 string-overall length?

[Larry Pattis]

Just looking for the overall length of the Taylor 14-fret grand auditorium 12 string.

If you have one, I’d also be just as interested in the full interior length of the Taylor case for this kind of guitar.

Thanks!

[phavriluk]

Ask Taylor. Drop a dime and ask.

[Larry Pattis]

Originally Posted by phavriluk

Ask Taylor.

Thanks, but I’d prefer an easy answer here, from someone with a simple tape measure.

[ScottSD]

I just measured my 756CE at 42 1/2" maybe a skosh more if you count the bottom strap pin. I know you asked for the GA length but I'm pretty sure the GS body is just a tad wider in the lower bout; same height. The case is 43 1/4" down the center of the inside.

[srhill]

Looks like 41 7/8 inches according to Taylor price List and specifications. I think that if you google it, it will give you all the specs.

[Larry Pattis]

Originally Posted by ScottSD

I just measured my 756CE at 42 1/2" maybe a skosh more if you count the bottom strap pin. I know you asked for the GA length but I'm pretty sure the GS body is just a tad wider in the lower bout; same height. The case is 43 1/4" down the center of the inside.

Thanks. I need to make sure I have the specs on the GA/case, as that’s the closest I can get for a small/goofy project I’m working on…

Originally Posted by srhill

Looks like 41 7/8 inches according to Taylor price List and specifications. I think that if you google it, it will give you all the specs.

Hmmm…all I can find are the specs that Taylor releases…20” body length, but nothing regarding overall length.

Anyone have an actual URL/link to the correct data?

[islandguitar]

Hi Larry,
I have a Taylor GA case that fits my McCollum GA.
The tag inside says "GA Mexico".
The inside length is 42.5"....the width at the widest lower bout is 16"
Hope that helps!
Fred

[stillsteven]

Originally Posted by Larry Pattis

Anyone have an actual URL/link to the correct data?

Page 9. https://www.taylorguitars.com/sites/...PRICE-LIST.pdf

[ScottSD]

Originally Posted by Larry Pattis

Thanks. I need to make sure I have the specs on the GA/case, as that’s the closest I can get for a small/goofy project I’m working on…

For what it's worth, my 756CE (2018 model) will fit into a GA Case. I know this because the good folks at the Guitar Center where I bought it new sent it home in a GA case. Didn't notice until I got it home and had to pry it out... Returned the case for a proper GS case. The only difference between the two guitars/cases being the lower bout is about an inch wider. The height of my GA and GS cases are identical.

Scott

[Larry Pattis]

Originally Posted by stillsteven

Page 9. https://www.taylorguitars.com/sites/...PRICE-LIST.pdf

Looks like 41-7/8” on a 12-string GA.

Thanks!

Originally Posted by islandguitar

Hi Larry,

I have a Taylor GA case that fits my McCollum GA.

The tag inside says "GA Mexico".

The inside length is 42.5"....the width at the widest lower bout is 16"

Hope that helps!

Fred

Helps a lot, thanks!