#1
|
|||
|
|||
midiverb ll issue??
I just bought a midiverb ll. I have it in
My rack box. I am having some distortion Issues mostly when i play lead that i did Not have prior to installing..i have alot Of stuff in my signal chain and this may Be the proverbial straw..guitar/ mandolin Into line 6 g50 wireless into ab switch. Ab switch goes into ch 1 or ch 2 of felix Preamp preamp goes into mackie board Via xlr.i then have one of those y cords Going into the left or right side of the Alesis jumpered to an eq and plugged Into the insert on the board.this Allows me to have seperate eq and Effects level for each inst. It is only after I introduced the midiverb that i started Getting distortion..and only at stage volumes. The midiverb has an input an output and a mix Knob....any ideas would be welcome |
#2
|
|||
|
|||
Well i may have figured it out.ill have
To wait for my next gig to confirm.. Not sure if after the 65 or so views of this thread With no replies may be from my description.. Of my signal chain...i know its a bit daunting but It sounds stellar when it is not distorting. I use a y cord to loop one speck asc eq through One side of the midiverb.then into the insert for That channel. Then i use another y cord to loop Through the other side of the midiverb throuh a Aphex tube eq and into the insert of the mandolin Channel..i get distortion on both..which makes Me think it is the addition of the midiverb thats Causing it. I adjusted the input/output gain ratios At home and found i can create the distortion Quite easily..also fix the issue as well. Hopefully it will work at a gig.. Last edited by varmonter; 04-02-2017 at 06:43 AM. |