#211
|
|||
|
|||
EKat wrote: “I SO wanted Blanchard to call his compound contoured Venetian cutaway his "Signature Cutaway." Ya know what he said? “Ewwwww. . . my name's not on it!"
Kath, tell him it actually has “Blanchard” written all over it! |
#212
|
|||
|
|||
^ ^ ^ ^ ^ FULLY LAUGHING OUT LOUD ^ ^ ^ ^ ^
We'll have our daily yammerfest and I'll tell him to check in on this thread. It's sounds so much like me, he'll think I paid you to post it! HILARIOUS! TFPU! (that's eKat for Thanks For Postin' Up!) |
#213
|
||||
|
||||
Lovely!
As so many here have already said, thank you for the super informative build thread! Much appreciated!!!
What a beauty... Enjoy this in FINE health and spirits Salud Paul
__________________
4 John Kinnaird SS 12c CUSTOMS: Big Maple/WRC Dread(ish) Jumbo Spanish Cedar/WRC Jumbo OLD Brazilian RW/WRC Big Tunnel 14 RW/Bubinga Dread(ish) R.T 2 12c sinker RW/Claro 96 422ce bought new! 96 LKSM 12 552ce 12x12 J. Stepick Bari Weissy WRC/Walnut More |
#214
|
|||
|
|||
Cutaway Crack-up Update . . . .
When I told a certain fine handcrafted geetar builder about Richard Mott's post, he fully laughed out loud as did I, again.
It was a very, very good one! I love this industry! |
#215
|
||||
|
||||
Boy, lots-o-activity in this thread today...
Quote:
Quote:
Quote:
Quote:
Might have been High Sierra hypoxia...
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |
#216
|
||||
|
||||
Thank you Steve. You can it a spin when we see each other at WILS in October...
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |
#217
|
|||
|
|||
Man-o-man, that is soooo choice! I play my Tamarack a lot lately--Blanchards are amazing! So glad you're bonding with it. Tim
|
#218
|
||||
|
||||
Thanks Tim.... I hope that you and your new Sobell are united.... In the mean time enjoy your Tamarack.
__________________
A bunch of nice archtops, flattops, a gypsy & nylon strings… |
#219
|
|||
|
|||
Hypoxia . . . .
HA, Bob . . . maybe you're right, the air is rare down there on the Eastside of the Range of Light. He did seem to laugh pretty darned hard.
|
#220
|
|||
|
|||
Quote:
When Mark built my pinyon (Lil Pinny) years ago, we had discussed the cutaway design at length, but more the shape of it rather than how he would finish it. As I recall he came up with 3 versions, and this is the one we decided on. This is a pic of the back. I think it looks very similar to the one Bob posted earlier of his new guitar. It's eerie, but what appears to be a little shelf as the back meets the neck is not at all. It's totally flat. But the effect is almost 3 dimensional. It's very hard to capture it on a photo! You would swear there is some contour there, but no. I just thought that was super cool. Mark's a magician. Just the little subtle things you notice from time to time on a guitar of this caliber. (Sorry Bob, I didn't mean to step on your Bristlecone thread, but I thought it was appropriate given Richard's posted observation on this design aspect of the cutaway).
__________________
Best regards, Andre Golf is pretty simple. It's just not that easy. - Paul Azinger "It ain’t what you don’t know that gets you into trouble. It’s what you know for sure that just ain’t so." – Mark Twain http://www.youtube.com/user/Gitfiddlemann |
#221
|
|||
|
|||
Andre . . . it's so cool to see Lil Pinny, again. I loved that guitar and the recordings you've done on him.
YAY! |
#222
|
|||
|
|||
I asked Blanchard to photograph Bob's cutaway by shooting down the neck and he tried but none of the images were any good. He doesn't have the product photo studio set up, yet.
Phooey. So . . . as an illustration of what that photo would have looked like, here's one I fully ripped off the Dream Guitar's page. Paul has an amazing photo studio set up and, as you can see, it's still nearly impossible to capture that cutaway - or any guitar, for that matter. They're harder to shoot than show cars, everything's just too shapely and shiny! Whoa, I don't know if that'll work, or not. |
#223
|
|||
|
|||
One trick that Mark Hatcher uses to get good photos is a polarizing filter, which can cut out much of the glare of surface reflections. Since these are going to be just the spots where the wood grain will reflect best this really helps. Now I have to find one that fits my camera....
|
#224
|
|||
|
|||
Frikk-a-Zee, I used to run a polarizing filter on my Nikkormat 35mm film camera. You're right, one would be fun to play with on the digi side of life.
Hmmmmm. Thanks, Al. |
#225
|
||||
|
||||
Quote:
__________________
"What have I learned but the proper use for several tools" -Gary Snyder Bourgeois DR-A / Bowerman "Working Man's" OM / Martin Custom D-18 (adi & flame) / Martin OM-21 / Northwood M70 MJ / 1970s Sigma DR-7 / Eastman E6D / Flatiron Signature A5 / Silverangel Econo A (Call me Dan) |