Guitars in stock - October 2023

[J.R. Rogers]

Sponsors (luthiers/builders/manufacturers), what guitars do you currently have in stock for sale or available from a dealer?

(Note: Sponsors only, please. I'll unstick this thread every month and start a new one to keep things fresh.)

JR

[Bill Kraus]

www.krausguitars.com
Top: bearclaw Sitka spruce.
Back and sides: quartersawn Honduran rosewood.
Fret board, bridge, headplate: ebony.
Fretboard radius: 12"
Bindings and trim: curly black mesquite.
Neck: Honduran mahogany.
Rosette: three ring, abalone and curly black mesquite.
Tuners: gold Gotoh 510
Bridge pins: ebony with abalone.
Neck width at nut: 1-3/4".
string spacing at the bridge: 2-3/16".
price :$6000.00

[Salz Guitars]

Brand new handmade acoustic guitar made in Praue, Czech republic. This one includes some innovative bulding techniques like falcate braced top (credit to Trevor Gore) structured sides (credit to Jeremy Clark of 52 instrument co.), active back plate and bolt on - bolt off neck (which allows the instrument to be completely diassembled within 2 minutes)

This is one of two first PS models. Sizewise close to the 00 (a little biger than a classical guitar). Due to its size it’s very comfortable to play.

Shipping worldwide available after contacting me. (I need to calculate the price depending on the country shipping to)

MATERIALS:

Soundboard - Swiss moon spruce

Back and sides - East indian rosewood, sides are structured - outer layer is East indian rosewood, core is kerfed Basswood and inner veneer is 0.6mm reclaimed Bog Oak from Charles bridge (one of the oldest bridges in Prague, Czech Republic)

Neck - one piece mahagony (headstock scarf jointed)

Fretboard, bridge, bridge pins, binding, headstock and back overlay - Crelicam ebony

Rosette - Crescent moon style, made of recycled math book paper, coffee grounds and bound with brass.

Finish - Natural oil over epoxy base

Frets - EVO gold

Tuners - Schaller M6 with ebony buttons

Nut and saddle - Bone

Case - SKB

SIZES:

Scale - 650mm (25.59")

Frets to body - 12

Lower bout width - 365mm (14.37")

Width at nut - 45mm (1.77")

Spacing at saddle - 59mm (2.32")

Fingerboard radius - 14”

PRICE: 5000 EUR plus shipping

[j. Kinnaird]

This guitar was made in 2009. The back and sides are African Blackwood and the top is Bear Claw European Spruce. It is a standard OM size with 25.5 inch string length
nut width is 1 and 3/4 inch, 2 and 1/4 spacing at the saddle
Tuners are Waverley 3500's
bindig and purfling in koa
African Blackwood bridge
Ebony fingerboard
Sound port
New price would be around $8000
I took this guitar in on trade for one of my new guitars.
Condition is near perfect, the tone is open and responsive

priced to sell, $3950 net to me