The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Reply
 
Thread Tools
  #1  
Old 01-16-2020, 09:41 PM
anjoga anjoga is offline
Registered User
 
Join Date: Sep 2019
Location: NY
Posts: 257
Default Changed strings to ej11 80/20 on my Taylor 214ce-k dlx and....

....all my heavy picks now sound dull and lifeless? I've been using the stock Elixirs on the guitar since I bought it and typically use heavy or extra heavy celluloid, 1.0 -1.5 primetones, 1.00mm nylon, etc.

I decided to shake things up and try a set of 80/20's. Never played anything but phosphor bronze. I picked the D'addario ej11's because they were cheap and if didn't like them I wouldn't feel too bad. I put them on last night and I am surprised. The bass is deeper, the treble is sweeter. However, if I use anything other than a medium celluloid or .73 or .88 nylon they guitar sounds like it has a blanket over it. I'm not a big fan of such flexible picks, but there is no denying they sound the best with this guitar with these strings right now.

After a day of playing, I'm surprised how much I am liking them considering how many threads I've read about 80/20's here and how unpopular they seem. Any thoughts on this phenomenon I'm experiencing?
__________________
Taylor AD17e Blacktop
Taylor 214ce-K DLX
Blueridge BR-40-12

Last edited by anjoga; 08-14-2020 at 08:49 AM.
Reply With Quote
  #2  
Old 01-16-2020, 09:51 PM
Crazyguitardj Crazyguitardj is offline
Registered User
 
Join Date: Sep 2019
Posts: 96
Default

I have a 214 c e also and I really like having light gauge strings on it... It really makes the guitar sing out well. The 214 was made light, or medium gauge strings on it. But I think it sounds better with light gauge
Reply With Quote
  #3  
Old 01-16-2020, 09:57 PM
Jaden Jaden is offline
Registered User
 
Join Date: Dec 2017
Posts: 1,960
Default

When I joined this forum, phosphor bronze and Martin Retros (monels) were often recommended but I’ve seen a sea change from pb to 80/20s - actually, there has been lots of criticism of the former, and as far as monels go, another shift from ‘only on mahogany guitars’ to wide ranging acceptance on rosewood backed guitars, depending on the individual instrument and personal preference - no hard and fast rules.

As for EJ11 80/20s - it’s absolute top notch performance for studio recordings depending on the instrument, but not long lasting - think high performance and quick decline. My favourite default string set for *years*.
Reply With Quote
  #4  
Old 01-17-2020, 03:09 AM
Oldguy64 Oldguy64 is offline
Registered User
 
Join Date: Feb 2014
Location: Kansas City metro
Posts: 4,667
Default

I like EJ11’s as well.
I’ve found that in many cases the 80/20’s will “play in” and sound about as warm as a new set of PB.
I have an “older” 110. Given a little time for the strings to play in, it has much bass thump with EJ11 and EJ13.
__________________
A bunch of guitars I really enjoy. A head full of lyrics,
A house full of people that “get” me.

Alvarez 5013
Alvarez MD70CE
Alvarez PD85S
Alvarez AJ60SC
Alvarez ABT610e
Alvarez-Yairi GY1
Takamine P3DC
Takamine GJ72CE-12-NAT
Godin Multiac Steel.
Journey Instruments OF660
Gibson G45
Reply With Quote
  #5  
Old 01-17-2020, 06:13 AM
anjoga anjoga is offline
Registered User
 
Join Date: Sep 2019
Location: NY
Posts: 257
Default

Thanks for the responses so far. I'm still really confused about why my heavy picks sound so dull with these 80/20 strings compared to the elixir nano phosphor bronze that had been on the guitar. Every thread I read here talks about how much brighter the 80/20's are supposed to be. I've never used a medium celluloid pick and liked it, but with these strings it is about the only pick I have right now that makes the guitar sound right to my ears.
__________________
Taylor AD17e Blacktop
Taylor 214ce-K DLX
Blueridge BR-40-12
Reply With Quote
  #6  
Old 01-17-2020, 08:57 AM
beatcomber beatcomber is offline
Registered User
 
Join Date: Jul 2016
Location: Lexington, Massachusetts
Posts: 1,444
Default

I've never tried 80/20's before, only PB and monels. I plan to re-string my 000-15SM this weekend, and have a set of Martin 80/20's that I will be trying out.

I'll post my impressions!
__________________
1955 Gibson ES-125
1956 Fender Champ lap steel
1964 Guild Starfire III
1984 Rickenbacker 330
1990s Mosrite (Kurokumo) Ventures
2002/2005 Fender Japan '60s Tele [TL-62-66US]
2008 Hallmark 60 Custom
2018 Martin Custom Shop 00-18 slot-head

1963 Fender Bandmaster (blonde blackface)
1965 Ampeg Gemini I
2020 Mojotone tweed Champ kit build
Reply With Quote
  #7  
Old 01-17-2020, 09:02 AM
wguitar wguitar is offline
Charter Member
 
Join Date: Dec 2018
Posts: 1,810
Default

Each guitar has it's own "personality", responding differently to different string/pick combinations. Experimentation will help you find that sweet spot. One pick you may want to try is the Dunlop Primetone (.73 & .88). They are stiffer than the Dunlop nylon picks, and should work very well with the EJ11 80/20's. Good luck!

Cheers!
Reply With Quote
  #8  
Old 01-17-2020, 09:31 AM
Shredmaster007 Shredmaster007 is offline
Registered User
 
Join Date: Jan 2018
Posts: 267
Default

To me, PBs seem to be scooped sounding with more harmonics in the high end (sizzle). 80/20s seem more fundamental with more mids and less harmonics. 80/20s cut through a mix more, I think that is where their reputation for being bright comes from.
Reply With Quote
  #9  
Old 01-17-2020, 11:24 AM
anjoga anjoga is offline
Registered User
 
Join Date: Sep 2019
Location: NY
Posts: 257
Default

Quote:
Originally Posted by wguitar View Post
Each guitar has it's own "personality", responding differently to different string/pick combinations. Experimentation will help you find that sweet spot. One pick you may want to try is the Dunlop Primetone (.73 & .88). They are stiffer than the Dunlop nylon picks, and should work very well with the EJ11 80/20's. Good luck!



Cheers!
I actually have a primetone .88 that sounds pretty good, but might need to go down to .73 though.
__________________
Taylor AD17e Blacktop
Taylor 214ce-K DLX
Blueridge BR-40-12
Reply With Quote
  #10  
Old 01-17-2020, 12:08 PM
vindibona1 vindibona1 is offline
Registered User
 
Join Date: Oct 2015
Location: Chicago- North Burbs, via Mexico City
Posts: 5,219
Default

Quote:
Originally Posted by anjoga View Post
....all my heavy picks now sound dull and lifeless? I've been using the stock Elixirs on the guitar since I bought it and typically use heavy or extra heavy celluloid, 1.0 -1.5 primetones, 1.00mm nylon, etc.

I decided to shake things up and try a set of 80/20's... I put them on last night and I am surprised.
The pick is an important piece of the puzzle because that is the main source of the strings' attack. But 80/20's seem to "dull up" more than PB's. They key is to see if you still like these strings in 2 or 3 weeks. Have you tried any Elixir 80/20's on your guitar?
__________________
Assuming is not knowing. Knowing is NOT the same as understanding. There is a difference between compassion and wisdom, however compassion cannot supplant wisdom, and wisdom can not occur without understanding. facts don't care about your feelings and FEELINGS ALONE MAKE FOR TERRIBLE, often irreversible DECISIONS
Reply With Quote
  #11  
Old 01-17-2020, 02:26 PM
anjoga anjoga is offline
Registered User
 
Join Date: Sep 2019
Location: NY
Posts: 257
Default

Quote:
Originally Posted by vindibona1 View Post
The pick is an important piece of the puzzle because that is the main source of the strings' attack. But 80/20's seem to "dull up" more than PB's. They key is to see if you still like these strings in 2 or 3 weeks. Have you tried any Elixir 80/20's on your guitar?
No, not yet. This is the first time I've tried any 80/20 strings. It is possible that the dulled sound you are talking about is the reason I need such a thin pick to make the strings ring out in a way pleasing to my ears, whereas I could use much thicker picks with PB strings and still get note clarity. Jury is still out on what I like better.
__________________
Taylor AD17e Blacktop
Taylor 214ce-K DLX
Blueridge BR-40-12
Reply With Quote
  #12  
Old 01-17-2020, 09:29 PM
Lillis Lillis is offline
Charter Member
 
Join Date: Jun 2018
Location: S.E. Florida via Indy
Posts: 2,146
Default

Quote:
Originally Posted by beatcomber View Post
I've never tried 80/20's before, only PB and monels. I plan to re-string my 000-15SM this weekend, and have a set of Martin 80/20's that I will be trying out.

I'll post my impressions!
I’ll be interested to read your thoughts on 80/20’s on the 00015sm
__________________
Taylor 322,512ce 12 fret cedar/hog & 362ce
Martin 00015SM
Guild 1966 F20
Larrivee P03 sitka/hog,simple 6 OM & OM 09
Eastman E100ss-sb
Gibson J185 & 2016 J35
Fender player plus telecaster & Mustang P90
Gretsch MIK 5622T
Reply With Quote
  #13  
Old 01-18-2020, 12:08 AM
Wild Bill Jones Wild Bill Jones is offline
Registered User
 
Join Date: Oct 2012
Location: Eastern Tennesse
Posts: 586
Default

Guess you just had a upfront close and personal experience on how different strings can change the sound of s guitar. I mess around with different strings all the time.
__________________
Rockbridge DDS
Huss & Dalton TD-R
Martin 50th D35
Martin D28 1937 Aged Authentic
John Walker Lochsa
Roberts Slope Dread
Johnny Rushing Ditson Style 12 Fret
Beard Goldtone Resonator
Bob Thompson Slope Shoulder
Reply With Quote
  #14  
Old 01-18-2020, 04:02 AM
ctvolfan ctvolfan is offline
Registered User
 
Join Date: Feb 2018
Location: Knoxville Tennessee
Posts: 616
Default

Similar situation for me. The original strings on my Yamaha FGX5 were Elixir PBs and were on the dead side. That's what's on them from the factory but i got the guitar used. I put some PB J16s on it and it was still too dull to my ears. Went to my local shop to get some Elixir 80/20 Bronze Nanowebs but they were out so i took some cheap EJ 11s. The guitar really came to life. Not too mellow and not too bright. Just right. I'm a Taylor guy so I'm used to bright and i wanted to go a different direction with this mahogany Yamaha. I wanted a warm tone but not too muted. These strings really balanced it out well. A little bit of bright and i was able to retain the warm sound. Jury is still out on how long they'll last. I'm gonna try that Elixers next time since they last a long time. But i really liked these.
__________________
2021 Eastman E10SS SB
2021 Eastman E8D TC
1972 Yamaha FG-180 Red Label (Taiwan)
2019 Yamaha FGx5
2020 Yamaha AC3M Deluxe
2019 Yamaha FG800
2005 Taylor 214
Ibanez AEB10E Acoustic Bass

Last edited by ctvolfan; 01-18-2020 at 08:51 AM.
Reply With Quote
  #15  
Old 01-18-2020, 06:30 AM
RockerDuck RockerDuck is offline
Registered User
 
Join Date: Sep 2008
Location: Canton, Georgia
Posts: 1,309
Default

Elixir 80/20 bronze is what I use now. Its for consistency. I use these on my Taylor 814ce and 314e, both x braced. 80/20 deliver warm punchiness in my playing.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > General Acoustic Guitar Discussion

Thread Tools





All times are GMT -6. The time now is 08:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=