#31
|
|||
|
|||
Very clever. Now I want to do one the opposite, with the tow on lam 1&3, and lam2 left extra height, so you can cut down the last few Hz with brace shaving instead of side weights. One day...
|
#32
|
|||
|
|||
first freq chart
just closed the box, resonance freq at 109 main top at 200, target value for main top will be 180.
|
#33
|
|||
|
|||
Closed box and added endgraft..
The endgraft jig was cut on my small cnc, the box is then routed using a 3/8 guide and 1/4' bit, the inlay is cut on the cnc allowing offsets for the guide bushng and purfling.
,,,,,, |