The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 10-15-2018, 03:37 PM
Jmaulz Jmaulz is offline
Registered User
 
Join Date: Mar 2018
Posts: 91
Default Jangly high E string

Greetings! The high E string on my OM 21 has a jangly quality to it, it's not a pure tone, but oscilates unevenly, with what sounds like jagged harmonics. It has this quality both open and fretted. I'm using a (D'Addario) .014 because I like it as pure and fat as possible. The other strings ring true. I guess it's the saddle. Any suggestions?
Thanks,
Mike.
__________________
2017 Martin D-28
2015 Martin OM-21
1974 William Kingsly classical
Fender "Eric Johnson" strat
75' RI Fender Jazz bass
Reply With Quote
  #2  
Old 10-15-2018, 03:47 PM
Bax Burgess Bax Burgess is offline
Registered User
 
Join Date: Sep 2010
Location: SE PA
Posts: 2,482
Default

Could be the fatter winding is catching in the pin slot/bridge ramp, not allowing the ball to firmly set on the bridge plate.
Reply With Quote
  #3  
Old 10-15-2018, 05:25 PM
mb propsom mb propsom is offline
Registered User
 
Join Date: Aug 2011
Location: Vancouver, WA
Posts: 403
Default

One question: Is this the first .014 that you've used on your OM, or have you used them before?

It might just possible you string might have a slight kink in it. So, for starters, try a new .014 string, making sure (like the previous poster recommended) that the ball end is seating against the bridge plate. If you still hear it then check the saddle to see if you need to create a sharper break on the top of it.
__________________
Michael Propsom
Reply With Quote
  #4  
Old 10-17-2018, 01:58 PM
Jmaulz Jmaulz is offline
Registered User
 
Join Date: Mar 2018
Posts: 91
Default

Using a new .014 string and securing the ball end against the bridge plate definitely helped, though it still has somewhat of a jangly, uneven character. I hoped that playing the new string shimmer off it would help, but this hasn't cleared it up.
__________________
2017 Martin D-28
2015 Martin OM-21
1974 William Kingsly classical
Fender "Eric Johnson" strat
75' RI Fender Jazz bass
Reply With Quote
  #5  
Old 10-17-2018, 02:05 PM
LouieAtienza LouieAtienza is offline
Registered User
 
Join Date: Feb 2013
Posts: 4,617
Default

Could be the higher tension of the strings causing the neck to have excessive relief and it's slapping against the high frets? Or maybe, the original string cut a slight groove on the saddle, and there's a tiny air gap where the thicker string sits on that groove? May not be seated right at the nut?


Fat string does not always equal fat tone.
Reply With Quote
  #6  
Old 10-19-2018, 11:42 PM
vibrolucky vibrolucky is offline
Registered User
 
Join Date: May 2017
Posts: 126
Default

Having recently gone through this, I can tell you its most likely the nut.

Can be fixed in about 5 minutes with the right size nut file. Sounds like its an 'overtone' (your oscillating example is correct) created by the string being seated in the nut at an incorrect angle. Pretty common problem.
__________________
Current Arsenal
1949 Gibson J45
1965 Martin D28
1980 Martin D41
2001 Gibson J-150
2021 Gibson J-150 Noel Gallagher
Reply With Quote
  #7  
Old 10-23-2018, 04:26 PM
Jmaulz Jmaulz is offline
Registered User
 
Join Date: Mar 2018
Posts: 91
Default

Quote:
Originally Posted by vibrolucky View Post
Having recently gone through this, I can tell you its most likely the nut.

Can be fixed in about 5 minutes with the right size nut file. Sounds like its an 'overtone' (your oscillating example is correct) created by the string being seated in the nut at an incorrect angle. Pretty common problem.
Great call, much better! Instead of a file I used 600 grit sandpaper under the string where it sits on the nut, pulled it back and forth a few times, and the string does seem to sit better. Thanks!
__________________
2017 Martin D-28
2015 Martin OM-21
1974 William Kingsly classical
Fender "Eric Johnson" strat
75' RI Fender Jazz bass

Last edited by Jmaulz; 10-23-2018 at 08:35 PM.
Reply With Quote
  #8  
Old 01-17-2019, 12:35 PM
Jmaulz Jmaulz is offline
Registered User
 
Join Date: Mar 2018
Posts: 91
Default

Quote:
Originally Posted by vibrolucky View Post
Having recently gone through this, I can tell you its most likely the nut.

Can be fixed in about 5 minutes with the right size nut file. Sounds like its an 'overtone' (your oscillating example is correct) created by the string being seated in the nut at an incorrect angle. Pretty common problem.
You're right, the tech could see that the bottom of the nut slot was uneven, the string wasn't resting fully on the forward edge. He filed it, no charge, problem solved!
__________________
2017 Martin D-28
2015 Martin OM-21
1974 William Kingsly classical
Fender "Eric Johnson" strat
75' RI Fender Jazz bass
Reply With Quote
  #9  
Old 01-17-2019, 01:21 PM
Imbler Imbler is offline
Registered User
 
Join Date: Nov 2015
Posts: 383
Default

Quote:
Originally Posted by Jmaulz View Post
You're right, the tech could see that the bottom of the nut slot was uneven, the string wasn't resting fully on the forward edge. He filed it, no charge, problem solved!

I'm glad your problem is fixed, but I don't know how a nut slot would cause problems on fretted notes as you described. I'm guessing he seated it better on the saddle while moving it aside to file the nut slot.
Reply With Quote
  #10  
Old 01-17-2019, 04:18 PM
Jmaulz Jmaulz is offline
Registered User
 
Join Date: Mar 2018
Posts: 91
Default

You're right, my original post did say open and fretted, the problem was really primarily the open string.
__________________
2017 Martin D-28
2015 Martin OM-21
1974 William Kingsly classical
Fender "Eric Johnson" strat
75' RI Fender Jazz bass
Reply With Quote
  #11  
Old 01-18-2019, 10:18 AM
Imbler Imbler is offline
Registered User
 
Join Date: Nov 2015
Posts: 383
Default

Quote:
Originally Posted by Jmaulz View Post
You're right, my original post did say open and fretted, the problem was really primarily the open string.
Oh, thanks for clearing that up for me - the solution makes total sense!
Mike
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Thread Tools





All times are GMT -6. The time now is 09:18 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=