#16
|
|||
|
|||
All my 80s-era turntables had a weight dial on the back end of the tonearm. You turn it until the arm floats, then dial in the desired pressure weight by using the markings (1/4 gram, or 1/10 gram markings).
__________________
Mike My music: https://mikebirchmusic.bandcamp.com 2020 Taylor 324ceBE 2017 Taylor 114ce-N 2012 Taylor 310ce 2011 Fender CD140SCE Ibanez 12 string a/e 73(?) Epiphone 6830E 6 string 72 Fender Telecaster Epiphone Dot Studio Epiphone LP Jr Chinese Strat clone Kala baritone ukulele Seagull 'Merlin' Washburn Mandolin Luna 'tatoo' a/e ukulele antique banjolin Squire J bass |
#17
|
|||
|
|||
Quote:
|
#18
|
|||
|
|||
Quote:
The vintage guy gave you bad or incomplete advice. Stylus cartridges are designed to operate at a specific pressure which is critical. If you balance the tonearm by first setting the dial to zero and then turn the counterweight until it is parallel with the platter then dial in, say, 1.5 grams of pressure you will be satisfied with the sound you get from your records. I mentioned 1.5 grams because it is likely that is the correct pressure for your Shure cartridge. Shure specified 0.75 to 1.5 grams for all the Shure cartridges I’ve used and it is better to err on the high side then the low side. Two more things, if the stylus in your cartridge is elliptical, it is important to align the stylus; if it is conical, alignment is unnecessary. (elliptical styluses track high frequencies better but are more costly) If you bought a used turntable, the stylus may be worn and need replacing. You’ll need a low power microscope to see if the stylus is worn. If in doubt, I would replace the stylus. A worn stylus, or one tracking grooves with insufficient pressure, will prematurely wear out you records. |
#19
|
|||
|
|||
Quote:
Your "stabilizer" is indeed neutering any calibration of the tone arm weight. Use a brush and cleaner if you need to, but lose the brush. Unless there has been some damage to the tone arm, there is little reason to believe that the calibration - with respect to the weight assembly markings - has changed. If you really prefer to have a brush on the record, get one that habits an independent arm. Don't compromise your tone arm and cartridge.
__________________
Go for the Tone, George |
#20
|
|||
|
|||
Quote:
|
#21
|
|||
|
|||
Vintage electronics?
It took me many months to save up for a nice sound system in 1978, so I've been reluctant to get rid of it. JVC quartz, phase locked loop turntable, receiver with graphic equalizer and as I recall - low THD, plus four foot tall speaker enclosures with premium components.
Nice to know my old record player now may be "vintage electronics." I dialed in the pressure on the tone arm with the rotating counterbalance years ago, and it's been fine ever since. Gram and a half sounds right. Has been so long since I thought about this, - I remember having a a hard wood handle with a round velvet surface for cleaning records.
__________________
Martin OM-18 Authentic 1933 VTS (2016) |
#22
|
|||
|
|||
Yeah, I know. Your post actually made me laugh because I had friends who used to tape coins on the head of their tonearms.
__________________
Martin J40 Alvarez Yairi FY-40 Yamaha FG180 Yamaha FG730S 1950 Epiphone Triumph |
#23
|
|||
|
|||
Quote:
Yup, I bought one of those too! |
#24
|
|||
|
|||
You also need a stylus cleaning brush. Clean the stylus after every side. Otherwise it will grind dirt into the grooves of the record and sound like crap. Take the arm out of the arm rest and let it drop next to the platter. Clean with a back to front motion, letting the weight of the arm be the only force on the brush. The best stylus cleaning brush was the old Discwasher stylus cleaner, but you can only buy those used on E-Bay now. You will need cleaning fluid, too.
__________________
Warren My website: http://draudio56.wix.com/warren-bendler "It's hard...calming the Beatle inside of me." |
#25
|
|||
|
|||
A stylus cleaning brush came with the Shure cartridge I bought. |
#26
|
|||
|
|||
That will work, just be gentle with it. You can use alcohol as a cleaning fluid.
__________________
Warren My website: http://draudio56.wix.com/warren-bendler "It's hard...calming the Beatle inside of me." |
#27
|
|||
|
|||
Slightly off-topic, but when I visited my daughter this past summer, she was looking for a new stylus for her Crosley turntable system that her mom had given to her. We hit a few stores, but she didn't find what she was looking for. Later that day when we got back to her house, she tried to play an album to show me the problem with her system. I said, "Have you checked to see if there's any lint on your needle?" She said, "I don't think that's the problem, but okay." She checked...and sure enough, there was a huge ball of lint on the needle. She cleaned it off and said, "I doubt that was the problem"...then tried her record again. Lo and behold...it played great! lol She said, "Wow! I didn't know that could make that big of a difference. Okay, then...can you tell me what this thing is? I got it when I bought a bunch of albums at a garage sale." It was a record preener so I showed her how to use it and explained why it was needed. Along this same line, we were fixing supper earlier that week and while my wife was cooking, my daughter and I fixed the drinks. My daughter said, "I don't have an automatic ice-maker so I have to use these things"...and she got out a plastic ice cube tray. I held it over her ice cube bin, gave it a twist, and popped out the ice cubes. You would have thought that I had performed some kind of miracle! She said, "OMG! How did you do that? I've been beatin' the hell out of these things to get the ice cubes out!" Sometimes it's nice to know the old ways.
__________________
Martin J40 Alvarez Yairi FY-40 Yamaha FG180 Yamaha FG730S 1950 Epiphone Triumph |
#28
|
|||
|
|||
Ha!
A few years ago, my older brother gave me all of his vinyl, as well as all his turntable accessories... and lo and behold! He had an original version of what your picture shows (Discwasher?), still in the wood grained cardboard box it came in, along with a separate big bottle of the fluid... the thing even has the instructions in the box! (My bro' is a bit compulsive/obsessive about some things!)
Had to laugh when I saw your picture... VERY glad that someone brought up the terrible idea of using a coin on the tonearm... it will rip up the grooves of your records. However, I will say that, back in the late 60's, I was involved in a "business commune" where we made very high-quality 8 track tapes... part of the process involved getting a really good reel-to-reel tape copy at 15 ips. Some vinyl just has anomalies, cracks and noise that are consistent within an entire pressing... to get a good copy of certain records or tracks within a record, we would sometimes use a dime on the tonearm of an AR turntable... only ONCE, though. With the additional weight of the dime, crackles and pops were largely negated, so a good recording could be made...
__________________
"Home is where I hang my hat, but home is so much more than that. Home is where the ones and the things I hold dear are near... And I always find my way back home." "Home" (working title) J.S, Sherman |
#29
|
|||
|
|||
No phono cartridge worth it's salt has a mustache . There are numerous reasons for this .
If you are truly serious about keeping a stylus clean , ethel alcohol is what you should use . A great solvent that leaves zero residue . Nearly impossible to buy here in Pa without a license , but can be had in other states . I am still using Ortophon cartridges . |
#30
|
|||
|
|||
Quote:
|