Running a Godin A6 through two pedalboards and one output

[windfall]

I am wondering if this is possible. Godin A6 Ultra using its two outputs.

Piezo signal -> body Rez -> Baggs venue -> MORLEY ABY
Humbucker signal -> volume pedal -> cab sim pedal -> Morley ABY

Run the combined signal from the ABY through specular tempus and then Out to PA (or to fish man loudbox and then to PA).

The advantage as I see it is foot control of the blend of acoustic and electric, More control including resonance on the acoustic signal, and the ability to model the electric signal With a cab sim. And then to modulate the final signal with delay/reverb.

Is this crazy? Any reason why it shouldn’t work?

Thanks!

[jonfields45]

Makes sense to me as a former A6 owner. If you want to use an IR loader instead of the BodyRez, I've got an IR from an all plywood Sonitone acoustic made with my algorithm that seems to work well in this sort of application.

[windfall]

Originally Posted by jonfields45

Makes sense to me as a former A6 owner. If you want to use an IR loader instead of the BodyRez, I've got an IR from an all plywood Sonitone acoustic made with my algorithm that seems to work well in this sort of application.

Thanks. IR loader... I will bear that In mind too, thanks very much