#1
|
|||
|
|||
Help. How to repair cracks and split on Gibson J 45
|
#2
|
|||
|
|||
Quote:
Sent from my XT1021 using Tapatalk |
#3
|
|||
|
|||
I think you should take that to a pro.
Here's a pic of how I do it on one that I am working on right now. |
#4
|
|||
|
|||
Quote:
Also, do you have to open the crack a little bit first to make sure it has a decent spread of glue on the inside of the joint before clamping? |
#5
|
|||
|
|||
Don't do anything to it. The dings are trivial. Put a few more in it so you can relax.
There is maybe a slight seam separation, which does not require immediate attention, and which you are much more likely to make worse than better. Keep an eye on it and if it spreads, find a good repair tech.
__________________
"Still a man hears what he wants to hear, and disregards the rest." --Paul Simon |
#6
|
|||
|
|||
Yes I use Titebond. You would definitely need to get glue throughout the crack. As Howard said you may not have to be to concerned at the moment but if it's very loose and easy to push apart then it should get fixed imho. Is the guitar living in a dry climate at the moment? OR is it humid there?
We cannot see the real problem as we cannot hold the guitar in our hands that's why you really should take it to a pro, it's a nice guitar. It's not exactly a hard job but it's easy to screw up too and it could potentially look awful. |
#7
|
|||
|
|||
As an aside, I just looked up titebond (I had never heard of it) and I was wondering if it has any dis/advantages over standard PVA glues like Aquadhere?
__________________
Maton CE60D Ibanez Blazer Washburn Taurus T25NMK |
#8
|
|||
|
|||
Cracks like that are often a sign of the wood drying out. If that is the case, first thing to do is humidify it. Anything beyond that I'd recommend taking it to a qualified tech.
|
#9
|
|||
|
|||
Thanks everyone for the advice. Just to answer the questions, I recently purchased it and I'm going to be keeping it in a properly humidified room to prevent any further damage. Got it on the cheap so was just looking to see if I could correct some of the cosmetic damage. Thanks again for your replies!!
|
#10
|
|||
|
|||
I never heard of Aquadhere before but I just looked it up. It's an interior PVA which sounds similar to Titebond so my guess is it's good enough. BUt you'd probably want to do some research on it.
|
|
Tags |
damage, gibson, j45, repair |
|