#31
|
|||
|
|||
Quote:
I think part of what I like is the feel and tonal difference between finger picking and digging in with a pick (I use thin picks on acoustics) on nylon. I also have thin lanky finger, so the flatter radius and slightly wider string spacing feels really nice to me. There is something about the sound on nylon strings when soloing and the nuance between that staccato sound and feel of the strings and neck. I love the same thing about steel string guitars but the nylon strings feel different with their own larger string diameter that I really enjoy when "noodlin'" around with and without a pick. I have a really cool 6-string nylon Amicus that Alister made for me a couple of years ago that is really, really fund to play. It has a slightly shorter Amicus scale length and is tuned up a full octave from regular guitar. I actually spent some time trying different types of special soprano nylon strings to get a great feel, which is one of my favorite nylon guitars to play. |
#32
|
|||
|
|||
I basically had the same experience as Jim did about one and a half years ago. I played a lot of nylons. I liked them, especially the Rainsong PA, but it seemed to me that there was technique involved that I hadn't learned yet. A few songs sounded good, but most not so great. I'd still like to have one, but I'm not sure if i want one bad enough to spend $1k plus. It's about time to move a few guitars out, so it may be time to pay my rental fees and check out a nylon. Some good info in these posts....thanks.
__________________
John |
#33
|
|||
|
|||
Quote:
__________________
YUP.... Emerald: X-20, Center hole X-10 (Maple) and X-7 (redwood), Spalted Chen Chen X 10 level 3, CA: Early OX and Cargo McPherson: Early Kevin Michael Proto Some wood things by Epi, Harmony, Takamine, Good Time, PRS, Slick, Gypsy Music, keyboards, wind controllers.. etc |
#34
|
||||
|
||||
Quote:
This thread (as usual) is turning into an excellent resource of information about a topic generally not explored! Love AGF!! |
#35
|
|||
|
|||
I 2nd the fusion recommendation.
|
#36
|
|||
|
|||
I tried a couple Fusions and a GK Studio. Kinda "meh"... I guess I am not ready to add a nylon string guitar.
Some may remember my experiment with putting nylon strings on my X7... I would consider that a miserable failure. Probably not fair putting nylon strings on a guitar made for steel strings, but I thought it would give me a preview of what to expect. What I didn't expect: tone that sounded dull and strings that were still stretching a week later. This may be one of those things that I can admire while watching/listening to others who do it well. I have also resigned myself that my NBA hopes probably won't happen either. My lovely wife has been very encouraging with this journey of discovery, to the point of suggesting some guitars she found (on-line search) at other guitar shops. With all the discussions here about nylon, I wondered what I might be missing... after a serious look-around, I am quite content with my steel string guitars; no FOMO. |
#37
|
|||
|
|||
Quote:
Or you truly want to give nylon a go, you should get a proper nylon-string guitar......or just stay with steel-strings.....whatever you choose. |
#38
|
|||
|
|||
Quote:
Simply relating my experiences and thinking out loud. Did I buy a nylon string guitar and try it for 6 months to give it a fair shake? Nope. And it is certainly not my intent to be negative about the whole nylon thing. I have enough years in that I know what I like... but, I do try to be open about trying new things, especially when spurred on by discussion here. I didn't make the decision about nylon based on my bad experience of putting nylon strings on a guitar made for steel strings... just trying to relate my journey. In the past week, I have spent more time in guitar shops than I have in the last 5 or 6 years combined. Frankly, I wasn't looking for a big dollar nylon, so that obviously plays a part, too. The best sounding nylon guitar I played was a Taylor 312ce-n... but, I'm not looking to spend that much. I played it (after my wife brought it over to me) to get some comparison. For some perspective, I helped my daughter pick out a couple steel string guitars that she will be letting her middle school students use, and for less than $300 she got two decent sounding/playing guitars. Just comparing options. I hope I didn't offend anyone by saying the nylon string guitars aren't for me. I don't want to dissuade anyone from finding what works best for them. My buddy Evan keeps talking about how much he enjoys his "nylon journey" (my words, not his), and I wanted to see what it was all about. I woudn't try to talk him into steel strings, either. Scott (who started this thread) and I seem to have similar tastes in guitars and amplification - I was curious. And now: curiosity satisfied. |
#39
|
|||
|
|||
Jim;
We are very similar in our thinking. Occasionally I dart in and give a steel string a run, nope, just doesn't work for me. What works for both of us is guitars, the choice of which guitar is up for grabs. It's nice having options. |
#40
|
|||
|
|||
Captain,
All good here.....no offense taken on my end. I just chimed in because I play both steel-string (a bit) as well as nylon-string (mainly) these days, and I have tried the very same mismatch string experiment....learned by experience. Steel or nylon-string......I always simply suggest that people should play that which feels right to them. It would be a boring world if we all liked exactly the same things! Now then....let's discuss your up-coming NBA draft...... |