The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair

Reply
 
Thread Tools
  #1  
Old 06-24-2018, 10:12 AM
Pineapple Pete Pineapple Pete is offline
Registered User
 
Join Date: Feb 2017
Posts: 63
Default Using a strap on a guitar with a neck/headstock repair

I've come into possession of a Seagull S6 Cedar. It has had a neck break, right below the headstock, repaired. The repair seems strong and the join looks clean; there's only the slightest feel of the seam under the hand.

I play outside and we generally have very hot and humid summer days. I'm already concerned about the reglued headstock holding up under the extreme conditions.

What about using a strap? Does anyone here use a strap with a repaired headstock? Do you you anchor the strap on the headstock or do you have a strap button on the heel?

Any advice would be appreciated.
Reply With Quote
  #2  
Old 06-25-2018, 10:03 PM
gfirob gfirob is offline
Registered User
 
Join Date: Mar 2017
Location: Central Vermont
Posts: 1,277
Default

A good headstock repair should be stronger than the original wood IMHO.
__________________
2003 Martin OM-42, K&K's
1932 National Style O, K&K's
1930 National Style 1 tricone Square-neck
1951 Rickenbacker Panda lap steel
2014 Gibson Roy Smeck Stage Deluxe Ltd, Custom Shop, K&K's
1957 Kay K-27 X-braced jumbo, K&K's
1967 Gretsch 6120 Chet Atkins Nashville
2014 Gold Tone WL-250, Whyte Lade banjo
2024 Mahogany Weissenborn, Jack Stepick

Ear Trumpet Labs Edwina
Tonedexter
Reply With Quote
  #3  
Old 06-26-2018, 06:24 AM
redir redir is offline
Registered User
 
Join Date: Aug 2011
Location: Mountains of Virginia
Posts: 7,679
Default

IT sounds like it was done right and so you should not have to worry about it. If it does break it would have broken anyway. You have to consider that there is 140 pounds of string tension and all you are doing is holding up a 4 pound guitar.
Reply With Quote
  #4  
Old 06-26-2018, 08:41 AM
Frank Ford Frank Ford is offline
Registered User
 
Join Date: Jul 2001
Location: Palo Alto, CA
Posts: 638
Default

Heat is the issue.

If it was repaired with aliphatic resin (Titebond) or polyvinyl (white glue) it may be vulnerable to joint separation in direct hot sun or in a hot parked car.

Other glues may be less likely to fail in high temps.

By the way, "stronger than the wood itself" is a common claim from glue marketers. Such claims can be substantiated by certain strength tests, while the glue might fail in others. Heat is a great example of this.
__________________
Cheers,

Frank Ford
Reply With Quote
  #5  
Old 06-26-2018, 09:38 AM
John Arnold John Arnold is offline
Registered User
 
Join Date: Jan 2009
Posts: 4,091
Default

Put the strap button on the heel. It is more functional (the guitar hangs better).
Reply With Quote
  #6  
Old 08-14-2018, 12:34 PM
Pineapple Pete Pineapple Pete is offline
Registered User
 
Join Date: Feb 2017
Posts: 63
Default

Good news - there actually is a strap button on the heel. I don't know if it's a factory feature or not, but it's there.

FYI I played an outdoor gig, three hours, in a combination of sun and shade, 85ish degrees. The Seagull held up fine.
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Build and Repair






All times are GMT -6. The time now is 04:24 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright ©2000 - 2022, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=