The Acoustic Guitar Forum

Go Back   The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Classical

Reply
 
Thread Tools
  #1  
Old 01-12-2021, 01:14 PM
Baldrick Baldrick is offline
Registered User
 
Join Date: Dec 2019
Posts: 3
Default vintage epiphone classical guitars

I have two Epiphone classical guitars from the 60s, an EC-100 ("Madrid") and an EC-300 ("Barcelona"). The labels in both guitars say "Kalamazoo Michigan" and "Union made".

The 1965 EC-100 is a typical gibson/epiphone product of the time: dovetail neck joint, zeroth fret fretboard, decal rosette, solid spruce top, mahogany back (one piece, appears solid) and sides, 35mm tuner roller spacing, typical gibson/epiphone peghead.

The 1967-68 EC-300 has a spanish heel neckjoint, inlaid rosette, solid spruce top, maple back (two piece) and sides, 39 mm tuner roller spacing, a peghead that is not gibson/epiphone shaped - in other words, typical spanish construction at the time. The only indication that it's an epiphone (other than the label) is the zeroth fret.

Were the top of the line epiphone classical guitars made in Spain? Or did gibson/epiphone bring spanish luthiers to Kalamazoo to build the high end classical guitars? Anyone out there know anything about this?

Thanks, in advance
Reply With Quote
  #2  
Old 01-12-2021, 02:57 PM
Steve DeRosa Steve DeRosa is offline
Registered User
 
Join Date: Mar 2013
Location: Staten Island, NY - for now
Posts: 11,285
Default

Insofar as I can tell from the info provided - some pics night be helpful if you have them - your guitars were the (much rarer) equivalent of the Gibson C-1 and C-4 classicals, and US-made in the Kalamazoo factory; BTW if you're looking for some really rare Epiphone fare, seek out a 1938-41 Epiphone Concert/Alhambra/Seville classical made in the original New York factory - probably no more than a handful in existence...
__________________
"Mistaking silence for weakness and contempt for fear is the final, fatal error of a fool"
- Sicilian proverb (paraphrased)

Last edited by Steve DeRosa; 01-12-2021 at 05:14 PM.
Reply With Quote
  #3  
Old 01-12-2021, 06:22 PM
Baldrick Baldrick is offline
Registered User
 
Join Date: Dec 2019
Posts: 3
Default vintage epiphone classical guitars

Here are some pictures of the vintage epiphone EC-100:








Here are some pictures of the EC-300








The differences are pretty dramatic. Despite the labels, I find it hard to believe they were made in the same factory.
There are equivalent Gibson models to the EC100 - they're pretty common on Reverb, but I've never seen a Gibson classical guitar of that era like the EC-300.

Last edited by Baldrick; 01-12-2021 at 06:24 PM. Reason: answer question
Reply With Quote
  #4  
Old 01-12-2021, 09:28 PM
Steve DeRosa Steve DeRosa is offline
Registered User
 
Join Date: Mar 2013
Location: Staten Island, NY - for now
Posts: 11,285
Default

As you've discovered, your EC-100 is the Epiphone equivalent of the Gibson C-1 - had a friend who owned the latter when I was in college and it was a nice little guitar, sweet-sounding and very comfortable to play...

Similarly, your EC-300 is the counterpart of the Gibson C-4 as I suspected - here's a photo of the latter showing the same quasi-mid-1800's headstock which, as you state, was not used on any other Kalamazoo instrument (note also the slightly different rosette on the Gibson - possibly a matter of availability, as the upper-end classicals were notoriously slow sellers):

__________________
"Mistaking silence for weakness and contempt for fear is the final, fatal error of a fool"
- Sicilian proverb (paraphrased)
Reply With Quote
Reply

  The Acoustic Guitar Forum > General Acoustic Guitar and Amplification Discussion > Classical

Thread Tools





All times are GMT -6. The time now is 10:41 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Copyright ©2000 - 2021, The Acoustic Guitar Forum
vB Ad Management by =RedTyger=